Canadian Airgun Forum

The #1 Community for Airguns in Canada!
It is currently Wed Nov 20, 2019 1:13 pm

All times are UTC - 5 hours


The Canadian Airgun Forums are a place for people to discuss and learn about airguns and the airgunning sport in Canada. There are lots of discussions about airguns, airgun accessories, reviews, modification and repair information, airgun events, field target and free classifieds!

 

You need to register before you can post: click the register link to proceed. Before you register, please read the forum rules. By joining our free community you will have access to post topics, communicate privately with other members (PM), respond to polls, upload your own pictures, and access many other special features. Registration is fast, simple, and absolutely free! To start viewing messages, select the forum that you want to visit from the selection below.








Post new topic Reply to topic  [ 5 posts ] 
Author Message
PostPosted: Wed Mar 16, 2016 12:04 am 
Offline
User avatar

Joined: Tue Sep 23, 2014 6:30 pm
Posts: 87
Location: Cambridge, Ontario
Hello all i recently saw the for sale post from Reaper http://www.airgunforum.ca/forums/topic71663.html and i am curious as to what it is how it works what it works on etc.
Basically everything one would need to know if they were to purchase said item or if they were interested in it.

Sorry in advance for poor grammar its 1am and i have been up for a while.

Thank you

_________________
Thomas

Gletcher NGT-R | Crosman 2240 | Crosman 2240 (Polished) | Frankenrifle (22xx derivative) | Slavia 618
Walther PPK/s | Umarex SA177 | Umarex XBG | Hatsan AT44 | Crosman Vantage | Baikal IJ-22


Top
 Profile  
 
PostPosted: Wed Mar 16, 2016 1:39 am 
Offline
User avatar

Joined: Sat Mar 16, 2013 5:15 am
Posts: 3580
Location: Edmonton
Why not try PMing Reaper (Dan).


Top
 Profile  
 
PostPosted: Wed Mar 16, 2016 2:10 am 
Offline
User avatar

Joined: Tue Apr 03, 2012 12:08 am
Posts: 821
Ooh hello Conrad,

Yes a PM inquiry would work just fine.

Ok.. I need a pinch of info on what cal and breech used, so I can determine
The hammer cocking pin is the right height. if you want to put a crosman breech
On you wili need a 2240 Length hammer to bolt pin.


Otherwise, you will for sure need to make a Transfer Port because that height was for the 3240 Crooked Barn .32 cal breech and is of different design.
back breech to tube screw.
You will need to use your own back Screw from the breech to the tube.

It has a back trigger frame screw in ss.

_________________
I'm O.C.D. and A.D.D. so everything has to be perfect, but not for long.


Top
 Profile  
 
PostPosted: Wed Mar 16, 2016 9:57 am 
Offline
User avatar

Joined: Tue Sep 23, 2014 6:30 pm
Posts: 87
Location: Cambridge, Ontario
Reaper wrote:
Ooh hello Conrad,

Yes a PM inquiry would work just fine.

Ok.. I need a pinch of info on what cal and breech used, so I can determine
The hammer cocking pin is the right height. if you want to put a crosman breech
On you wili need a 2240 Length hammer to bolt pin.


Otherwise, you will for sure need to make a Transfer Port because that height was for the 3240 Crooked Barn .32 cal breech and is of different design.
back breech to tube screw.
You will need to use your own back Screw from the breech to the tube.

It has a back trigger frame screw in ss.


Now that i think about it pm would have worked yes, and I have a 2260 and a couple of 2240's all in .22. My 2260 uses a BNM breech, while my pistols use regular breeches.

_________________
Thomas

Gletcher NGT-R | Crosman 2240 | Crosman 2240 (Polished) | Frankenrifle (22xx derivative) | Slavia 618
Walther PPK/s | Umarex SA177 | Umarex XBG | Hatsan AT44 | Crosman Vantage | Baikal IJ-22


Top
 Profile  
 
PostPosted: Wed Mar 16, 2016 9:49 pm 
Offline
User avatar

Joined: Tue Apr 03, 2012 12:08 am
Posts: 821
Hello,

The stick up on the hammer pin out of the tube is .233" or little less then 1/4"
You want the pin to be free floating and have good contact with the bolt.

You can put a 2240 crosman steel breech on and use the 2240's hammer pin.

You can use your BNM breech and hammer pin.

You're Gonna have to a make transfer port for .22 caliber.

Let me know if you have any more questions.

_________________
I'm O.C.D. and A.D.D. so everything has to be perfect, but not for long.


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 5 posts ] 

All times are UTC - 5 hours


Who is online

Users browsing this forum: No registered users and 2 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
News News Site map Site map SitemapIndex SitemapIndex RSS Feed RSS Feed Channel list Channel list

Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group

phpBB SEO