Canadian Airgun Forum

The #1 Community for Airguns in Canada!
It is currently Fri Nov 22, 2019 8:41 pm

All times are UTC - 5 hours


The Canadian Airgun Forums are a place for people to discuss and learn about airguns and the airgunning sport in Canada. There are lots of discussions about airguns, airgun accessories, reviews, modification and repair information, airgun events, field target and free classifieds!

 

You need to register before you can post: click the register link to proceed. Before you register, please read the forum rules. By joining our free community you will have access to post topics, communicate privately with other members (PM), respond to polls, upload your own pictures, and access many other special features. Registration is fast, simple, and absolutely free! To start viewing messages, select the forum that you want to visit from the selection below.








Post new topic Reply to topic  [ 5 posts ] 
Author Message
 Post subject: 2240 vs 1377 hammer pin
PostPosted: Sun Mar 27, 2016 4:39 pm 
Can someone measure their 2240 hammer pin? I'm using a 1377 hammer pin with a 2240 maintube and hammer. I think it's dragging. The trigger pull is heavier than before. I know the 1377 hammer and maintube is smaller dia.

Thanks
Robert


Top
  
 
PostPosted: Mon Mar 28, 2016 6:03 pm 
Offline

Joined: Thu Jan 08, 2009 4:20 pm
Posts: 262
Location: Markham , Ontario
Crosman lists the same part# for the 2240 and 1377 hammer pin


Top
 Profile  
 
PostPosted: Mon Mar 28, 2016 6:17 pm 
Offline
User avatar

Joined: Sat Nov 03, 2007 4:19 pm
Posts: 8979
Location: Coalmont BC
Yep, they are identical.... My guess is you have a burr in the cocking slot, or maybe the sear slot, that the hammer or pin is catching on....

Bob

_________________
Dominion Marksman Silver Shield - 5890 x 6000 in 1976, and downhill ever since!
Airsonal;
Too many! Springers, Pumpers, CO2, but I love my PCPs and developing them!
Proud Member of the 2000+fps Club!


Top
 Profile  
 
PostPosted: Mon Mar 28, 2016 7:19 pm 
Offline
User avatar

Joined: Wed Mar 26, 2008 7:12 pm
Posts: 2368
Location: Woodstock
Back off the breech screw, the #8-32 on the back and make sure it's not rubbing. Happens with custom breeches or replaced screws.

_________________
Daisy Red Ryder


Top
 Profile  
 
PostPosted: Tue Mar 29, 2016 8:03 am 
DerekVinyard wrote:
Back off the breech screw, the #8-32 on the back and make sure it's not rubbing. Happens with custom breeches or replaced screws.


Thanks, I'll check that out. I'm going to polish up the hammer.


Top
  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 5 posts ] 

All times are UTC - 5 hours


Who is online

Users browsing this forum: No registered users and 0 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
cron
News News Site map Site map SitemapIndex SitemapIndex RSS Feed RSS Feed Channel list Channel list

Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group

phpBB SEO