Canadian Airgun Forum

The #1 Community for Airguns in Canada!
It is currently Sun Dec 15, 2019 5:14 pm

All times are UTC - 5 hours


The Canadian Airgun Forums are a place for people to discuss and learn about airguns and the airgunning sport in Canada. There are lots of discussions about airguns, airgun accessories, reviews, modification and repair information, airgun events, field target and free classifieds!

 

You need to register before you can post: click the register link to proceed. Before you register, please read the forum rules. By joining our free community you will have access to post topics, communicate privately with other members (PM), respond to polls, upload your own pictures, and access many other special features. Registration is fast, simple, and absolutely free! To start viewing messages, select the forum that you want to visit from the selection below.








Post new topic Reply to topic  [ 6 posts ] 
Author Message
 Post subject: Breech for 22xx
PostPosted: Fri Dec 30, 2016 6:03 am 
Offline

Joined: Tue Jul 22, 2014 5:25 am
Posts: 366
Location: Canada
Which single shot steel breech should I buy from Canadian Shooting Supplies?

The Crosman breech I have used but I find the bolt to be sloppy.
Comments on the other steel breech they sell would be nice.

_________________
Tazz


Top
 Profile  
 
 Post subject: Re: Breech for 22xx
PostPosted: Fri Dec 30, 2016 7:44 am 
Offline

Joined: Tue Feb 18, 2014 7:24 pm
Posts: 684
Location: Dowling ,ontario
I'd go with this one http://scopesandammo.com/storefront/pro ... 22xx-p-427
It's a bit pricey but looks beautiful once mounted.

_________________
Not quite done collecting
PP700SA .25
Alecto .177
HW97 .177
HW80 .177
HW35 .177
HW100KTFSB 177
Winchester 257-70
Discovery 257
Airspeed .25
Frankendisco .25
FX ImpactX .223,22,177,172
K550 .22
Windy City .22
Daisy 953 .177


Top
 Profile  
 
 Post subject: Re: Breech for 22xx
PostPosted: Fri Dec 30, 2016 8:02 am 
Offline

Joined: Thu May 07, 2015 8:30 pm
Posts: 1190
Location: Eastern Townships
Maybe you could have another bolt made with tighter tolerances? What is the current bolt you're using?


Top
 Profile  
 
 Post subject: Re: Breech for 22xx
PostPosted: Fri Dec 30, 2016 9:37 am 
Offline

Joined: Tue Jul 22, 2014 5:25 am
Posts: 366
Location: Canada
Maybe you could have another bolt made with tighter tolerances? What is the current bolt you're using?

At the moment I,m using the original brass bolt that I modded into a extended bolt.
The steel bolt that comes with the steel Crosman breech seem very loose also.

I have two 22xx builds now with the crosman steel breech and I'm ready to try something different on my 3rd build.

I guess you could say I'm doing my homework.

_________________
Tazz


Top
 Profile  
 
 Post subject: Re: Breech for 22xx
PostPosted: Fri Dec 30, 2016 10:35 am 
Offline

Joined: Thu May 07, 2015 8:30 pm
Posts: 1190
Location: Eastern Townships
tazz wrote:
Maybe you could have another bolt made with tighter tolerances? What is the current bolt you're using?

At the moment I,m using the original brass bolt that I modded into a extended bolt.
The steel bolt that comes with the steel Crosman breech seem very loose also.

I have two 22xx builds now with the crosman steel breech and I'm ready to try something different on my 3rd build.

I guess you could say I'm doing my homework.


Yes, I guess so :) I assume the other steel breeches listed are GMAC units, which have a very good reputation. I'm very curious to see if someone here on the CAF have tried them out.


Top
 Profile  
 
 Post subject: Re: Breech for 22xx
PostPosted: Fri Dec 30, 2016 11:42 am 
Offline

Joined: Mon Aug 08, 2016 7:23 am
Posts: 2838
Location: Somewheres near the Atlantic
airmec wrote:
tazz wrote:
Maybe you could have another bolt made with tighter tolerances? What is the current bolt you're using?

At the moment I,m using the original brass bolt that I modded into a extended bolt.
The steel bolt that comes with the steel Crosman breech seem very loose also.

I have two 22xx builds now with the crosman steel breech and I'm ready to try something different on my 3rd build.

I guess you could say I'm doing my homework.


Yes, I guess so :) I assume the other steel breeches listed are GMAC units, which have a very good reputation. I'm very curious to see if someone here on the CAF have tried them out.


Even the steel breech on my maximus was loose. But im running a gmac multi shot breech. Which is well built.


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 6 posts ] 

All times are UTC - 5 hours


Who is online

Users browsing this forum: No registered users and 2 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
News News Site map Site map SitemapIndex SitemapIndex RSS Feed RSS Feed Channel list Channel list

Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group

phpBB SEO