Canadian Airgun Forum

The #1 Community for Airguns in Canada!
It is currently Sun Dec 15, 2019 4:24 pm

All times are UTC - 5 hours


The Canadian Airgun Forums are a place for people to discuss and learn about airguns and the airgunning sport in Canada. There are lots of discussions about airguns, airgun accessories, reviews, modification and repair information, airgun events, field target and free classifieds!

 

You need to register before you can post: click the register link to proceed. Before you register, please read the forum rules. By joining our free community you will have access to post topics, communicate privately with other members (PM), respond to polls, upload your own pictures, and access many other special features. Registration is fast, simple, and absolutely free! To start viewing messages, select the forum that you want to visit from the selection below.








Post new topic Reply to topic  [ 11 posts ] 
Author Message
PostPosted: Sat Feb 18, 2017 9:37 am 
Offline
User avatar

Joined: Tue Mar 12, 2013 1:35 pm
Posts: 882
Location: North Of Toronto
Need to check hammer pin.

_________________
Benjamin Discovery .22
Discovery 2240 Pistol .22
Crosman DPMS SBR
KWC 1911 Tac
Leapers UTG BB 3x12x32


Top
 Profile  
 
PostPosted: Sat Feb 18, 2017 10:35 am 
Offline
User avatar

Joined: Tue Jun 03, 2008 5:46 pm
Posts: 2817
Location: Canada
That you feel a need to ask, leads me to wonder if you're 100% sure of "which" screw does "what"...if this is the case, it's always better to de-gas and be SURE you're not about to do something that will have consequences.

With a "stock" Disco, neither receiver screw holds the valve in place, and the receiver can be removed with the tube pressurized.

Al


Top
 Profile  
 
PostPosted: Sat Feb 18, 2017 10:46 am 
Offline
User avatar

Joined: Tue Mar 12, 2013 1:35 pm
Posts: 882
Location: North Of Toronto
I know exactly, what screw does what! So your saying not to.....then you say yes?

2 breech screws to take off. I'm not touching the valve.i have taken this apart enough to know what screws are what.

Nothing wrong with double checking!

_________________
Benjamin Discovery .22
Discovery 2240 Pistol .22
Crosman DPMS SBR
KWC 1911 Tac
Leapers UTG BB 3x12x32


Top
 Profile  
 
PostPosted: Sat Feb 18, 2017 11:01 am 
Offline
Supporting Members
User avatar

Joined: Mon Jan 01, 2007 10:54 pm
Posts: 4935
Location: Saint John NB
I refuse to work on any gun storing energy.......spring,air, or CO2.

_________________
Jonathan

Im addicted to brake fluid..........but I can stop anytime....


Top
 Profile  
 
PostPosted: Sat Feb 18, 2017 11:56 am 
Offline

Joined: Tue Aug 30, 2016 3:24 pm
Posts: 106
Location: Sidney Bc, Canada
I'm inclined to agree with the previous post. It's always a wise idea to insure the weapon is completely safe to work on. Would rather air on the side of caution and prevent any chance of injury by eliminating the chances. I must would degas and depressurize the entire gun before commencing any sort of repair or diagnostic work.


Top
 Profile  
 
PostPosted: Sat Feb 18, 2017 12:29 pm 
Offline
User avatar

Joined: Tue Mar 12, 2013 1:35 pm
Posts: 882
Location: North Of Toronto
I did degas and I have the bolt running smooth again!

I know this question was the obvious for safety reasons but I was just wondering.

_________________
Benjamin Discovery .22
Discovery 2240 Pistol .22
Crosman DPMS SBR
KWC 1911 Tac
Leapers UTG BB 3x12x32


Top
 Profile  
 
PostPosted: Sat Feb 18, 2017 1:41 pm 
Offline
User avatar

Joined: Tue Jun 03, 2008 5:46 pm
Posts: 2817
Location: Canada
Canadianguy wrote:
I have the bolt running smooth again!.


Good stuff. :)

So what was the problem with it?

Al


Top
 Profile  
 
PostPosted: Sat Feb 18, 2017 2:31 pm 
Offline
User avatar

Joined: Tue Mar 12, 2013 1:35 pm
Posts: 882
Location: North Of Toronto
My bolt wouldn't cock back....like the hammer was sticking. I took off the reciever took out hammer cleaned it and lubed it.At first I thought the pin was bent.

Seems to be working smooth now.

I've ran into this before on a 2240, it seems like I'm the only one that this happens to lol

_________________
Benjamin Discovery .22
Discovery 2240 Pistol .22
Crosman DPMS SBR
KWC 1911 Tac
Leapers UTG BB 3x12x32


Top
 Profile  
 
PostPosted: Sat Feb 18, 2017 2:39 pm 
Offline

Joined: Wed Sep 10, 2014 2:42 pm
Posts: 147
Location: Ontario
Mine was also hard to cock on my disco .22, especially after a made a SSG and I did the same thing. A really good polish and lube helps.


Top
 Profile  
 
PostPosted: Sat Feb 18, 2017 3:24 pm 
Offline
User avatar

Joined: Tue Mar 12, 2013 1:35 pm
Posts: 882
Location: North Of Toronto
Isn't that a bitch when that happens! I thought also it might have been the tiny breech screw hitting the hammer.

_________________
Benjamin Discovery .22
Discovery 2240 Pistol .22
Crosman DPMS SBR
KWC 1911 Tac
Leapers UTG BB 3x12x32


Top
 Profile  
 
PostPosted: Sat Feb 18, 2017 4:13 pm 
Offline

Joined: Sun Nov 06, 2011 2:16 pm
Posts: 1640
Location: 1/2 Way From Ottawa and Montreal,
Use the KISS system Keep It Simple s...... Yes always degas it to keep the danger at bay. stay safe.

_________________
Custom Design by ME PCP/HPA Air Carbine 10-50X60 Scope My 2018 FT Open


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 11 posts ] 

All times are UTC - 5 hours


Who is online

Users browsing this forum: No registered users and 7 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
News News Site map Site map SitemapIndex SitemapIndex RSS Feed RSS Feed Channel list Channel list

Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group

phpBB SEO