Canadian Airgun Forum

The #1 Community for Airguns in Canada!
It is currently Mon Dec 16, 2019 8:52 am

All times are UTC - 5 hours


The Canadian Airgun Forums are a place for people to discuss and learn about airguns and the airgunning sport in Canada. There are lots of discussions about airguns, airgun accessories, reviews, modification and repair information, airgun events, field target and free classifieds!

 

You need to register before you can post: click the register link to proceed. Before you register, please read the forum rules. By joining our free community you will have access to post topics, communicate privately with other members (PM), respond to polls, upload your own pictures, and access many other special features. Registration is fast, simple, and absolutely free! To start viewing messages, select the forum that you want to visit from the selection below.








Post new topic Reply to topic  [ 5 posts ] 
Author Message
 Post subject: Ruger airhalk velocity
PostPosted: Sat Aug 18, 2018 11:29 am 
Offline

Joined: Thu Apr 27, 2017 4:38 pm
Posts: 152
found out the ruger airhalk shoots over the legal limit with 520 fps with 7.8 grain pellets and 640 with those crosman high velocity pellets. i don't think it is dieseling or anything, just thought it was weird a Canadian airgun shoots that fast. anyone else choreographed their ruger airhalk before, or whatever Diana model its a clone of? just wanted to know if you've had similar results.


Top
 Profile  
 
PostPosted: Sat Aug 18, 2018 11:47 am 
Offline
User avatar

Joined: Fri Jan 22, 2010 1:17 pm
Posts: 1842
Location: Kingston, ON
Hi.
It's difficult to tune or detune a springer (any gun for that matter) to shoot 495 fps since there is so much variability in the system. It is not unusual to chrony a non PAL (springer in particular) and get numbers above 500 fps. Two major reasons could be: dieseling caused by combustible oil and grease in the compression chamber and barrel, and light weight pellets.
You can prevent dieseling with a good clean out and use only silicone oil in the compression chamber and no combustible oil or grease in the barrel. Chrony with standard weight pellets after a break in period of about 250 pellets afterward. Standard weight in .177 would be those around 7.9 gr.
And yes it happens that you may still be slightly over 500 fps. As long as you haven't shimmed the spring or plugged a bleed hole I wouldn't worry about it.
And the Air Hawk is based on the Diana 34, but isn't a 100% clone, meaning not all parts are interchangeable. Springs, piston seals are interchangeable. I believe stocks are not, and cocking arms are not as well.

_________________

Duke ))))----//----------==


Top
 Profile  
 
PostPosted: Sat Aug 18, 2018 12:57 pm 
Offline
User avatar

Joined: Thu Oct 04, 2012 10:27 am
Posts: 1108
Location: Thunder Bay,On.
Well it would be nice as Canadians if we were told the exact pellet weight tested for fps checks...
I've heard 7.4 as the .177 standard and also .7.9...since you did not alter the gun I assume you would be okay...Myself I have a pal anyway but if I didn't I'd probably lop off a coil......just to be on the safe side...it is odd though..never heard of one shooting over before...sometimes they are well below the 495 mark

_________________
The cave you fear to enter....holds the treasure you seek


Top
 Profile  
 
PostPosted: Sat Aug 18, 2018 2:20 pm 
Offline

Joined: Mon Aug 08, 2016 7:23 am
Posts: 2839
Location: Somewheres near the Atlantic
If you don't think its dieseling. I think issue with your chrony.

Since mine out of the box shot around 480 FPS with 7.9grns and 7.4s was still under 500. I put a full power spring and 8.4 grns was 880 FPS.


Top
 Profile  
 
PostPosted: Wed Aug 22, 2018 8:24 pm 
Offline

Joined: Mon Aug 13, 2007 9:04 pm
Posts: 717
Mine shot 510-520 fps C de-tuned version with 7.9gr no matter licensed for all.


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 5 posts ] 

All times are UTC - 5 hours


Who is online

Users browsing this forum: No registered users and 9 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
News News Site map Site map SitemapIndex SitemapIndex RSS Feed RSS Feed Channel list Channel list

Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group

phpBB SEO