Canadian Airgun Forum

The #1 Community for Airguns in Canada!
It is currently Tue Nov 12, 2019 2:27 pm

All times are UTC - 5 hours


The Canadian Airgun Forums are a place for people to discuss and learn about airguns and the airgunning sport in Canada. There are lots of discussions about airguns, airgun accessories, reviews, modification and repair information, airgun events, field target and free classifieds!

 

You need to register before you can post: click the register link to proceed. Before you register, please read the forum rules. By joining our free community you will have access to post topics, communicate privately with other members (PM), respond to polls, upload your own pictures, and access many other special features. Registration is fast, simple, and absolutely free! To start viewing messages, select the forum that you want to visit from the selection below.








Post new topic Reply to topic  [ 3 posts ] 
Author Message
PostPosted: Sun Sep 02, 2018 10:32 pm 
Offline
User avatar

Joined: Sat Sep 24, 2016 8:24 am
Posts: 76
Location: South shore Montreal
Hi!
I thought I’d share with you how I managed to adjust the non-adjustable sights on my Umarex HPP. The HPP is not a particularly accurate bb gun but like many others it can achieve just over 2 inche groupings at around 20ft. But I absolutely love my HPP for its overall qualities rarely found in a single gun…Realistic look (Sig 229 ish) and weight, heavy blowback, hard hitter (over 400fps), around 60-70 good shots per co2 cartridge.
I mostly practice IPSC shooting with it and only need “A” zone accuracy but its fixed sights resulted in POI slightly low and to the right of POA.
A lower POI is an easy fix requiring filing the front post until the desired elevation is achieved.
But adjusting for windage on the rear sight would required some head scratching… I started by determining how much windage adjustments I needed by adding multiple layers of masking tape on the left side of the rear notch until the POA coincide with the POI. With a Vernier caliper I first measured the remaining rear notch gap. Then the layers of tape were removed, and I measured the full width of the rear notch. The full width minus the remaining gap measured with the layers of tape in place gave me the material thickness I needed.
I manage to find an aluminum ruler that had the exact thickness I was looking for. I cut a slightly oversize piece of the ruler with the same profile as the rear sight and epoxied it in place.
Attachment:
mire pas peint.JPG
mire pas peint.JPG [ 408.07 KiB | Viewed 572 times ]

I let it dry overnight and filed all protruding sides flush to the original profile. A couple of coats of paint and the added shim is barely visible.
Attachment:
mire dessus.JPG
mire dessus.JPG [ 297.05 KiB | Viewed 572 times ]

One added benefit I only noticed after it was finished is that the rear notch is now just slightly larger than the front post. Compared to the original where there were large gaps of lights each side of the front post when aiming. I found that the smaller gaps are easier to center the front post in the rear notch.
Attachment:
mire viser.JPG
mire viser.JPG [ 264.07 KiB | Viewed 572 times ]

Hope this could be of some help to others…

_________________
«It's not enough that we do our best, sometimes we have to do what's required»
- Winston Churchill

Daisy 953
Umarex HPP
Walther PPK/S
Smith & Wesson M&P 40
Colt Python .357 (polymer)
Walther CP99
Smith & Wesson TRR8
KWC 226-S5


Top
 Profile  
 
PostPosted: Wed Sep 05, 2018 6:48 pm 
Offline

Joined: Sun Mar 24, 2013 1:56 pm
Posts: 225
Location: Lebanon, CT
Clever idea, and you certainly did a fine job of it. RC


Top
 Profile  
 
PostPosted: Mon Sep 10, 2018 7:50 pm 
Offline
User avatar

Joined: Thu Mar 22, 2007 6:29 am
Posts: 342
Location: niagara
That’s a great fix. So simple. Some of the best ideas are the simplest. I can’t wait to do this to my x-five. I’ve been compensating when we shooting steel. This will speed up my hits. Thanks


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 3 posts ] 

All times are UTC - 5 hours


Who is online

Users browsing this forum: BB1Shooter and 2 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
News News Site map Site map SitemapIndex SitemapIndex RSS Feed RSS Feed Channel list Channel list

Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group

phpBB SEO