Canadian Airgun Forum

The #1 Community for Airguns in Canada!
It is currently Thu Nov 21, 2019 9:22 am

All times are UTC - 5 hours


The Canadian Airgun Forums are a place for people to discuss and learn about airguns and the airgunning sport in Canada. There are lots of discussions about airguns, airgun accessories, reviews, modification and repair information, airgun events, field target and free classifieds!

 

You need to register before you can post: click the register link to proceed. Before you register, please read the forum rules. By joining our free community you will have access to post topics, communicate privately with other members (PM), respond to polls, upload your own pictures, and access many other special features. Registration is fast, simple, and absolutely free! To start viewing messages, select the forum that you want to visit from the selection below.








Post new topic Reply to topic  [ 12 posts ] 
Author Message
 Post subject: scope shooting question.
PostPosted: Fri Oct 11, 2019 9:23 am 
Offline

Joined: Wed Jun 15, 2011 3:08 pm
Posts: 1004
Location: niagara region.
hi guys. i don,t know much about shooting with scopes. i just started using them and red dots lately because my eyes are going bad. i only have about 20 feet to my targets to shoot. i have a brand new utg bug buster. starts at 3 yds. i put it on my daisy 953 so i could shoot real small targets. well i took the rear sight off. put the smallest mounts i had on it. i,ve got it almost shooting exact center. BUT i have to go up just a touch and i have no --up clicks left-- it,s as far as it will go. what am i doing wrong. i know 20 feet is a short distance. believe me i wish i had more. but i also wish i had the same eyes as i did 30 years ago. thanks.


Top
 Profile  
 
PostPosted: Fri Oct 11, 2019 10:05 am 
Offline
User avatar

Joined: Mon Jun 16, 2008 4:36 pm
Posts: 710
Location: nvvan
How high is you scope mounted? The lower you can get it the easier to sight in.

_________________
I machine, I build , I shoot
Sent via Flux Capacitor uF


Top
 Profile  
 
PostPosted: Fri Oct 11, 2019 12:08 pm 
Offline

Joined: Wed Jan 05, 2011 12:35 pm
Posts: 6018
Location: P.G. B.C.
For shooting close ranges, oft times (with air guns), an angled mount is needed, to hold the scope at an angle to the bore.
some guys simply put a shim under the mount, but that can bend the scope's tube.

D&L sells an angled mount, like this.

https://dlairgun.com/collections/leaper ... ator-mount

_________________
Best Wishes
Daryl


Top
 Profile  
 
PostPosted: Fri Oct 11, 2019 12:48 pm 
Offline

Joined: Wed Jun 15, 2011 3:08 pm
Posts: 1004
Location: niagara region.
walther wrote:
How high is you scope mounted? The lower you can get it the easier to sight in.

i dug around in my parts drawer and found the lowest mounts i had. the front of the scope is almost touching the gun probably about 3/16" away from touching. the shots now are almost dead center. but if i had to go any higher at all. i wouldn,t be able to. i might have to try one of the other cheap scopes i have.i wanted to use the bug buster because it,s new. thanks. w.


Top
 Profile  
 
PostPosted: Fri Oct 11, 2019 12:52 pm 
Offline

Joined: Wed Jun 15, 2011 3:08 pm
Posts: 1004
Location: niagara region.
Daryl wrote:
For shooting close ranges, oft times (with air guns), an angled mount is needed, to hold the scope at an angle to the bore.
some guys simply put a shim under the mount, but that can bend the scope's tube.

D&L sells an angled mount, like this.

https://dlairgun.com/collections/leaper ... ator-mount

hey d. yep that's probably what i would need. but i think i,ll try a few more things before i order anything. thanks. d.


Top
 Profile  
 
PostPosted: Fri Oct 11, 2019 2:42 pm 
Offline
User avatar

Joined: Wed Jul 26, 2017 7:01 pm
Posts: 2105
Location: GTA, ON
If run out of upwards adjustment, shouldn't you try a higher profile mount/rings can resolve the problem??

Just move the whole scope upwards for about 1/4 to 1/2 inch and re zero it again, however as the clearance between the scope and the gun is bigger, your focus range is shortened...

Sent from my S8 via Tapatalk

_________________
Future AA ProSport
HW30/35
2240+14" barrel
Camo Chaser long barrel rifle kit
P3+2x20 Kit Scope
HW40+Extender
HW45+Grip panels from Russia


Top
 Profile  
 
PostPosted: Fri Oct 11, 2019 4:21 pm 
Offline
User avatar

Joined: Sat Nov 05, 2016 10:52 am
Posts: 2948
Location: Caronport, Saskatchewan
Nope it's opposite =). Lowest possible is needed.

Sent from my EML-L09 using Tapatalk

_________________
Website: https://airgunarcheryfun.ca/


Top
 Profile  
 
PostPosted: Fri Oct 11, 2019 4:25 pm 
Offline
User avatar

Joined: Mon Jun 16, 2008 4:36 pm
Posts: 710
Location: nvvan
YepYep wrote:
If run out of upwards adjustment, shouldn't you try a higher profile mount/rings can resolve the problem??


Sent from my S8 via Tapatalk


Sounds counter intuitive but the closer you are to the target lower scope mounts make it easier to sight in. I always have scopes mounted so low that the flip up scope covers have "just enough room to operate. I also shoot at close range with utg bugbusters indoors this helps alot.

_________________
I machine, I build , I shoot
Sent via Flux Capacitor uF


Top
 Profile  
 
PostPosted: Fri Oct 11, 2019 5:21 pm 
Offline

Joined: Wed Jun 15, 2011 3:08 pm
Posts: 1004
Location: niagara region.
I barely used this scope. I have no idea how it got all the way to no more clicks. but before I stopped shooting tonight. I turned the turret completely backwards. it turned 4 full turns. then I turned it ahead 2 full turns. that would be the halfway point. right. I won,t have another chance to try it again until Monday probably. (because of the neighbours.) should I be able to see the crosshairs move when I turn it.


Top
 Profile  
 
PostPosted: Fri Oct 11, 2019 6:11 pm 
Offline
User avatar

Joined: Wed Jul 26, 2017 7:01 pm
Posts: 2105
Location: GTA, ON
wesb2007 wrote:
Nope it's opposite =). Lowest possible is needed.

Sent from my EML-L09 using Tapatalk
Isn't that I need to adjust the POI upwards, I adjust the sight upwards?!

And adjusting the scope will be just same as the open sights by turning the top turret counter clockwise to turn it up to release it and let the internal spring to push up the inner tube of the scope?!

Sent from my S8 via Tapatalk

_________________
Future AA ProSport
HW30/35
2240+14" barrel
Camo Chaser long barrel rifle kit
P3+2x20 Kit Scope
HW40+Extender
HW45+Grip panels from Russia


Top
 Profile  
 
PostPosted: Fri Oct 11, 2019 6:57 pm 
Offline
User avatar

Joined: Sat Nov 05, 2016 10:52 am
Posts: 2948
Location: Caronport, Saskatchewan
Think about it like this. The higher the scope is from the barrel the more down angle you are going to need to get the sight line to intersect with the bullet. If you draw a line on paper and another one above on a slight angle down you'll see that the higher up you draw the second line the farther away it will be before the two lines intersect. He only has 20 feet so he needs his scope as low as possible on the gun on order to get the scope lined up with the bullet.
Cheers,
Wes

Sent from my EML-L09 using Tapatalk

_________________
Website: https://airgunarcheryfun.ca/


Top
 Profile  
 
PostPosted: Fri Oct 11, 2019 7:28 pm 
Offline
User avatar

Joined: Wed Jul 26, 2017 7:01 pm
Posts: 2105
Location: GTA, ON
Yes, I know the theory... Using the lowest possible mount/rings to give a wider usable focus area to use the scope in short distance...

But back to OP's real world case, he can manage to zero the scope at the moment. But the upwards adjustment just ran out.

So, he wants more upwards adjustment.

And imagine, we can offer the scope another 60 mils to going up... So as needed, the OP can keep on turning the scope upwards... Isn't that the physical central eye sight line through the scope is keep on going up, right? If so, doesn't that means we just set the scope upper can give more upwards adjustment.

Or maybe not use a higher profile mount, but just shimming up both rings...

Using high mount for scope and shooting short distance isn't impossible, if you zero it at the dead spot and shoot from the fixed distance always, it can still work... Do you remember the famous scope setting for the izzy 46M?
Image

Sent from my S8 via Tapatalk

_________________
Future AA ProSport
HW30/35
2240+14" barrel
Camo Chaser long barrel rifle kit
P3+2x20 Kit Scope
HW40+Extender
HW45+Grip panels from Russia


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 12 posts ] 

All times are UTC - 5 hours


Who is online

Users browsing this forum: Majestic-12 [Bot] and 0 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
News News Site map Site map SitemapIndex SitemapIndex RSS Feed RSS Feed Channel list Channel list

Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group

phpBB SEO