CZ 200T

[scooter]

I prefer the look and adjustments of the 200T [ vs the 200S ] but would like one around 12 ft lb with no downside in reliability nor accuracy

Anyone got a good 200T gun that would meet my requirements for sale ? Tks

[YepYep]

The CZ200 (T or S, AA S200) is highly adjustable for the power... and I never worry about its accuracy...

So what kind of the adjustment you referred on the 200T which the 200S doesn't have? The front globe sight and the rear diopter sight?

[scooter]

Stock adjustmants , like butt pad and cheek piece as well as having option of both scope and target sights f/r

I also just like the look of the T . The S looks too plain - - at least in photos , and liking the look I find plays a part in the enjoyment of the rifle - - as well as comfort , accuracy & trigger

[YepYep]

I think you are talking about this one....

As I know while I bought mine from the forum store ( https://www.airgunforum.ca/store/produc ... cts_id=210 ), it's a 3rd generation which got the one piece stock. And the one above is the 2nd generation which using a 2-pieces stock and can have an adjustable butt piece. It looks that one is hard to find now. Still have hope that someone might have that and willing to sell. We have quite a few CZ200 lovers in the forucm~

And... but the way, I don't find mine is "too plain"... Actually at the beginning, I found it's too fancy~

[scooter]

Im not a fan of laminated stocks . I prefer the nice wood grained ones with adjustments

I wonder if the T and S models are interchangable in the variety of stocks , and if there was a " kit " to make a 12 ft lb'er out of the T

Tks for your knowledge

[scooter]

Bought a CZ 200S from Tenda as airgun store here only had the laminated listed -- then the next day they had the wood stock listed !

But thats the way everything goes with me on computers

The gun arrived but I have questions that neither the internet nor Tenda could answer

There were 2 lg aluminum adaptors in the accessory bag

Couldnt find any info on them but I assume one was for degassing the cyl and the other for filling

I have a Hill Pump with foster fitting on its fill hose

The adaptor I have to join the foster to the aluminum tank fitting doesnt have the same thread [close but it wont thread on ]

So I have 2 questions

1 what do I need to fill the tank

2 what is the small set screw in the aluminum fitting for

Attached is a photo of what I have

- - and of course it wont attach as its too big a file - but I have no idea how to fix that

Maybe from my description someone will know

Tks

john

[Rob27]

I cannot help with the fittings, but when I want to post a picture that I took on my Android phone I do the following.
Go into my picture Gallery
Select the pictures that I want to post.
Click the "Share" icon at the bottom
Select Email as the way to share.
Address the note to myself.
Before hitting send, Select the option to Resize Images.
Select the smallest size
Hit send
You now have much smaller versions of the images and can post them.

This seems like a lot of steps but it is faster to do than it is to describe.
I know that there are other ways to resize images, but I can do this all from my phone in seconds.
Good luck with your fittings!
Rob27

[YepYep]

The below 1/8 BSP to foster should fit... however, I didn't order my adapter from AGS as at the time, there's no stock anywhere in Canada, so I ordered my set from Best Fittings directly...

https://www.airgunsource.ca/foster-male ... aptor.html

This is what I use...

[YepYep]

And... regarding the one small set screw... I don't remember what it is... if in the future you have the need to tune the gun or disassemble it, you might found out what it is...

[scooter]

tHANK YOU

i PUT MY ORDER IN

[YepYep]

No problem~ Hope you enjoy yours!!

And by the way, it looks the regular wood stock model in Tenda is a 22cal?! I saw it's a 22cal and muzzle speed spec is 800fps~ If so, that one should be almost max out the output and will be noisy... And that's why it's a "Hunter" model I think...