WTB Short Piston for Crosman Phantom
WTB Short Piston for Crosman Phantom
I have my PAL. A friend gave me his NON-PAL Phantom in .22 and I'd like to increase the velocity. Thank you
Re: WTB Short Piston for Crosman Phantom
I have cut a long down to a short and drilled a new latch hole, but the piston is hardened steel, so I needed a new carbide drill bit to drill the hole then a diamond dremel bit to flatten to match the sear.
I looked at the 2 different Phantom parts Diagram at Crosman USA the second model CS1K77A CS7M77A shows a piston # CRS5177-030 . That piston is in stock at D&L https://dlairgun.com/products/crs5177-0 ... -with-seal
You can use this link here to find your exact model and download the part diagram https://support.crosman.com/hc/en-us/se ... 5#articles
I have 5 short piston but they are all in guns at this time.
Robert
I looked at the 2 different Phantom parts Diagram at Crosman USA the second model CS1K77A CS7M77A shows a piston # CRS5177-030 . That piston is in stock at D&L https://dlairgun.com/products/crs5177-0 ... -with-seal
You can use this link here to find your exact model and download the part diagram https://support.crosman.com/hc/en-us/se ... 5#articles
I have 5 short piston but they are all in guns at this time.
Robert