How would i change...

Message

link_dc · #1 Post by **link_dc** » Fri Nov 18, 2005 12:19 am

well ive heard that lots of people change the plastic things around the pivot screw, and put in metal, what do i use for the metal? and how do the plastic things come out?

link_dc · #2 Post by **link_dc** » Fri Nov 18, 2005 5:02 pm

oops i forgot to say which gun it is, its the quest 500, ive heard tons of people say that they changed the thing im talking about. somone must know

RM422 · #3 Post by **RM422** » Fri Nov 18, 2005 5:52 pm

You need to be a little more specific in order for us to help.

#4 Post by **webstien** » Fri Nov 18, 2005 6:25 pm

if its anything like my slavia or b2 breakbarrels all ya gotta do is unscrew the barrel block hing/screw, replace the bushing, and re-assemble with the new bushings.

RM422 · #5 Post by **RM422** » Fri Nov 18, 2005 6:40 pm

Oh thats what your talking about. Sorry link-dc. What webstein said sounds right.

link_dc · #6 Post by **link_dc** » Sat Nov 19, 2005 2:32 am

webstien wrote:if its anything like my slavia or b2 breakbarrels all ya gotta do is unscrew the barrel block hing/screw, replace the bushing, and re-assemble with the new bushings.

and another thing i want to know is what the heck is bushing!?