For everything modification and repair related post here.
RM422
Posts: 1186 Joined: Sat Sep 03, 2005 8:37 amLocation: ontario
#1
Post
by RM422 Mon Nov 21, 2005 8:13 pm
ONE SHOT, ONE KILL
RM422
Posts: 1186 Joined: Sat Sep 03, 2005 8:37 amLocation: ontario
#2
Post
by RM422 Mon Nov 21, 2005 8:19 pm
It's not quite finished yet I still have to scope it. I did the valve mods, put on the 1760 barrel and put in a 2200 piston. Not much else I can do. You guys have any suggestions? From 20 feet at full power which is 30 pumps or so it goes a little more than half way through a 2x4.
ONE SHOT, ONE KILL
DoctorFrankengun
Posts: 1657 Joined: Thu Sep 08, 2005 1:58 pmLocation: Cochrane, Ontario Canada
#3
Post
by DoctorFrankengun Wed Nov 23, 2005 9:22 am
How long is the barrel on your gun and what difference is there between the 2200 piston and the original piston that was in the gun?
RM422
Posts: 1186 Joined: Sat Sep 03, 2005 8:37 amLocation: ontario
#4
Post
by RM422 Wed Nov 23, 2005 4:23 pm
My barrel is 24". And the difference between the 2 pistons is the original piston is plastic and the 2200 piston is metal. and metal builds a much better compression.
ONE SHOT, ONE KILL
killercrow
Posts: 2374 Joined: Thu Oct 13, 2005 5:20 pmLocation: Spruce Grove AB
#5
Post
by killercrow Wed Nov 23, 2005 5:26 pm
yes it can compress more... but what seals the air? is it the same cup as is in the 1377? if so you wont get any difference from it. shouldnt anyhow.
RM422
Posts: 1186 Joined: Sat Sep 03, 2005 8:37 amLocation: ontario
#6
Post
by RM422 Wed Nov 23, 2005 7:16 pm
Yes the pump cups are the same. But on the 13xx mods page it says metal gives better compression. And I can really feel it to. It gets really hard to pump.
ONE SHOT, ONE KILL
killercrow
Posts: 2374 Joined: Thu Oct 13, 2005 5:20 pmLocation: Spruce Grove AB
#7
Post
by killercrow Wed Nov 23, 2005 8:07 pm
cool stuff! i guess if it works, it works!
RM422
Posts: 1186 Joined: Sat Sep 03, 2005 8:37 amLocation: ontario
#8
Post
by RM422 Wed Nov 23, 2005 9:07 pm
Yes it works really well indeed. You should try it. But you said you already made a brass piston for it. It should work just as well. Good Luck!!!
ONE SHOT, ONE KILL
ABshooter
Posts: 4438 Joined: Sun Nov 06, 2005 8:26 pmLocation: Southern Alberta
Contact:
#9
Post
by ABshooter Thu Nov 24, 2005 4:56 pm
Did you paint the forarm?
Hey, don't hate. It releases negative energy, which is bad for everyone.
RM422
Posts: 1186 Joined: Sat Sep 03, 2005 8:37 amLocation: ontario
#10
Post
by RM422 Thu Nov 24, 2005 6:49 pm
Yes I wanted it to match the rest of the gun.
ONE SHOT, ONE KILL
ABshooter
Posts: 4438 Joined: Sun Nov 06, 2005 8:26 pmLocation: Southern Alberta
Contact:
#11
Post
by ABshooter Mon Dec 19, 2005 3:09 am
Looks like it could do a pretty good job at hunting.
Hey, don't hate. It releases negative energy, which is bad for everyone.
RM422
Posts: 1186 Joined: Sat Sep 03, 2005 8:37 amLocation: ontario
#12
Post
by RM422 Mon Dec 19, 2005 7:31 am
Yes it does about 800fps.
ONE SHOT, ONE KILL
