co2 pistol .40
co2 pistol .40
This is my co2 pistol in cal.40 it has a 12" barrel, whit a sound moderator.
I use it to shoot .40 blowgun darts, and runs on 12g co2 bulbs.
its a converted Wgp Minicocker paintballmarker
I use it to shoot .40 blowgun darts, and runs on 12g co2 bulbs.
its a converted Wgp Minicocker paintballmarker
- under500fps
- Site sponsor and moderator
- Posts: 6371
- Joined: Thu Sep 22, 2005 3:40 pm
- Location: Eastern Passage N.S.
- thudthumper
- Posts: 241
- Joined: Mon Jan 09, 2006 1:52 am
- Location: Georgia, USA
- ustilago
- Supporting Member 2009
- Posts: 1180
- Joined: Wed Sep 07, 2005 2:47 am
- Location: On and on south of Vulcan
- Contact:
Someone else here did a Talon a while back.
Hmmm, I've got enough parts laying around to throw a Tigershark together. Got the barrel sleeve for my Daisy and the stock barrel for my 2240 somewhere around here too.
Quit giving me impure thoughts. . .
Hmmm, I've got enough parts laying around to throw a Tigershark together. Got the barrel sleeve for my Daisy and the stock barrel for my 2240 somewhere around here too.
Quit giving me impure thoughts. . .
Fiat Lux
PM me for FTP/valve combos, RVAs, DPHs and assorted brass accents
PM me for FTP/valve combos, RVAs, DPHs and assorted brass accents
used a terminator .40 blowgun as a barrel, glued it to position inside the paintball barrel whit expoy.
an original bolt compared to my modded one
the holowtube seal inside the barrel.
then i drilled out the zlits for bolthandle and cockinglever.
the hole in the bolt must be alinged over the transferport when the bolt is closed.
pix of the probe sealing against the barrel
i had to do alot of power mods to, cos its original limited to 3 joule.
incresed valvevolume and valve mod, had to repositioned the pistolgrip, to get a longer hammerstroke.
an original bolt compared to my modded one
the holowtube seal inside the barrel.
then i drilled out the zlits for bolthandle and cockinglever.
the hole in the bolt must be alinged over the transferport when the bolt is closed.
pix of the probe sealing against the barrel
i had to do alot of power mods to, cos its original limited to 3 joule.
incresed valvevolume and valve mod, had to repositioned the pistolgrip, to get a longer hammerstroke.
Good point jezx, im on it.
will install a "push well lock" pin to prevent the bolt from takingoff.
Yes Joben, i had come across that issue, it seems that some type off blogundarts arent ment to handel that speed and pressure
the .40 spike darts (22grains) work well around 300fps-400fps.
but at higer speed the skirt might fold, 500fps-700fps and they become unstabile but might stabilise furder down range?
working on some modifications on the gun, will post pictures when its done.
its getting a longerbarrel whit a screw on moderator, an is instaling diopter sight.
might bullkfill it but thats gonna cost me 90usd extra
will install a "push well lock" pin to prevent the bolt from takingoff.
Yes Joben, i had come across that issue, it seems that some type off blogundarts arent ment to handel that speed and pressure
the .40 spike darts (22grains) work well around 300fps-400fps.
but at higer speed the skirt might fold, 500fps-700fps and they become unstabile but might stabilise furder down range?
working on some modifications on the gun, will post pictures when its done.
its getting a longerbarrel whit a screw on moderator, an is instaling diopter sight.
might bullkfill it but thats gonna cost me 90usd extra
its not getting a longer barrel i stick to the 24".
instead off having a shroud that extend 6" forward from the muzzle, i gonna get a threded coupling to the sound moderator.
this way i get a more compact rifle that brakes down i 4 pieces when transporting (no tools neded).
i got this walther diopter fore a real bargin
all the parts needed for bulking has now been orded
instead off having a shroud that extend 6" forward from the muzzle, i gonna get a threded coupling to the sound moderator.
this way i get a more compact rifle that brakes down i 4 pieces when transporting (no tools neded).
i got this walther diopter fore a real bargin
all the parts needed for bulking has now been orded