NEWBIE here

[yums88]

hey whats up, im new to this site and the airgun hobby in general. i

currently own a cp sport handgun and a gamo delta. i was wondering if

there are any mods i can do to either of these.

- thanks

[Parker_101_]

welcome there yums88......enjoy your stay........

[under500fps]

Welcome yums88 somebody will come up with an answer to your questions soon.

[sniper]

hey whats up, im new to this site and the airgun hobby in general. i currently own a cp sport handgun and a gamo delta. i was wondering if there are any mods i can do to either of these.
- thanks

Hi yums88, welcome to the forum.

Sorry to tell you that there is no mod you can or want to do with either of those guns.

[airgunfun]

Welcome to the Group.

Not much you can do to mod these airguns. Perhaps some accessories...maybe.

[RossB]

The Gamo Delta shares the same piston seal and spring with the Expo.
I suspect that an Expo spring may fit the Delta and bring velocity close to 650fps in .177.
The Expo spring should be 29 coils of .118 wire with a .531" ID.
Gamo does not sell parts to individuals.
Several other springs will fit and improve velocity.
A mainspring for a Diana 27, HW30, or BSA Meteor may fit and would improve velocity.
A machine gun spring can be used but could require piston sleeving for best fit.
Take the Delta apart and measure piston ID and available stacked spring room.
Macarri probably makes a suitable spring.
I have a dozen different sizes of mainspring in my parts boxes.

[yums88]

The Gamo Delta shares the same piston seal and spring with the Expo.
I suspect that an Expo spring may fit the Delta and bring velocity close to 650fps in .177.
The Expo spring should be 29 coils of .118 wire with a .531" ID.
Gamo does not sell parts to individuals.
Several other springs will fit and improve velocity.
A mainspring for a Diana 27, HW30, or BSA Meteor may fit and would improve velocity.
A machine gun spring can be used but could require piston sleeving for best fit.
Take the Delta apart and measure piston ID and available stacked spring room.
Macarri probably makes a suitable spring.
I have a dozen different sizes of mainspring in my parts boxes.

thanks but i dont know how to take it apart or where to find these springs. as well i was wondering if you can tell me what kind of mounting hardware i need for a scope and where i can get a cheap beginner level scope. thanks

[yums88]

Welcome to the Group.

Not much you can do to mod these airguns. Perhaps some accessories...maybe.

what kind of accesories could i put on it ( liek i said im new to this) as well what kind of mount do i need and where can i get a cheap beginners scope?

[KPB*WPG]

You can try fitco there's a link in here;
http://www.airgunforum.ca/forum/viewtops.214-0-0.html

Welcome to the forum

KEV