Mod Quest 500 to 1000.

Message

XoX1de · #1 Post by **XoX1de** » Wed Dec 07, 2005 6:18 pm

Hello everyone, I'm new here and I will ask the step I should do to modd my veslowcity Quest 500 to 1000. What's the main difference btw those gun? Is the springs on both gun are same? If I buy the piston and the seal the gun will be a 1000?

thanks for ur answer.

Parker_101_ · #2 Post by **Parker_101_** » Wed Dec 07, 2005 6:28 pm

XoX1de ..Welcome to the forum.....enjoy yourself here....there is lots of info to occupy many hours with good reading material........If you try the search features....you'll probably find the answers to many of your questions regarding the Quest.......

XoX1de · #3 Post by **XoX1de** » Wed Dec 07, 2005 6:29 pm

Parker_101_ wrote:XoX1de ..Welcome to the forum.....enjoy yourself here....there is lots of info to occupy many hours with good reading material........If you try the search features....you'll probably find the answers to many of your questions regarding the Quest.......

Yes I did I searched all around but theres no answer to my question.

The mainspring...

#4 Post by **Voltar1** » Wed Dec 07, 2005 7:00 pm

Welcome.
You need but search and read the info is there and very sound advice.
Gotta use the Search function as advised. Do you know how to search?
Walter...

XoX1de · #5 Post by **XoX1de** » Wed Dec 07, 2005 8:16 pm

Voltar1 wrote:Welcome.
You need but search and read the info is there and very sound advice.
Gotta use the Search function as advised. Do you know how to search?
Walter...

Ofcorz I know, cmon guys all I want to know is the mainsprings, are they different on both model...Quest500 and 1000

#6 Post by **webstien** » Wed Dec 07, 2005 10:19 pm

quite sure its the exact same spring, only difference is the piston length. Which you can modify yourself....

ETA · #7 Post by **ETA** » Wed Dec 07, 2005 11:53 pm

XoX1de wrote:
Voltar1 wrote:Welcome.
You need but search and read the info is there and very sound advice.
Gotta use the Search function as advised. Do you know how to search?
Walter...
Ofcorz I know, cmon guys all I want to know is the mainsprings, are they different on both model...Quest500 and 1000

Welcome XoX1de!

The reason the other guys are a bit testy is because the answer is just a few posts down, on the same page, right under your nose.

http://www.airgunforum.ca/forum/viewtopic.1383.html

RM422 · #8 Post by **RM422** » Thu Dec 08, 2005 4:53 pm

Ok since nobody is telling you then heres the trick. The 1000x and 500x are only different inside by the piston. The springs are both the same. The quest 1000x has a shorter piston allowing for more volume and increased power. So what you can do is either order a 1000x piston or cut your 500x piston to length. It would be easier to order because then no mistakes can be made. Then either moly lube or superlube your spring and your good to go.