Low tech Brakes

Message

ineedpal · #16 Post by **ineedpal** » Sun Dec 18, 2005 10:06 pm

can you add 2~3 baffles for the "muzzle brake"

? what is the ID of the front cap? I think 6.5mm is idea for cal22.

#17 Post by **sniper** » Mon Dec 19, 2005 1:28 am

ineedpal wrote:can you add 2~3 baffles for the "muzzle brake" ? what is the ID of the front cap? I think 6.5mm is idea for cal22.

Yes, that's the whole idea with that beautiful design but you can do that
after, customized it any way you want. ......

killercrow · #18 Post by **killercrow** » Mon Dec 19, 2005 2:10 am

hey man, sign me up for one of them! are you just lookin to make them all up the same dimensions? or are you flexible on the size of the hole in the front piece? if so, make mine 5.5mm, and dont worry bout the tubing.

ETA · #19 Post by **ETA** » Tue Dec 20, 2005 2:35 am

Good stuff Metalmuncher49!

That is pretty well how I do my shrouds, except that I use Delrin instead of high quality brass.

A spacer here and there. A smaller hole here and there.

Aaron · #20 Post by **Aaron** » Tue Dec 20, 2005 3:37 pm

i am painting mine black right now, so pretty coll its a 11 and 1/2 inch shroud and makes my gun sound like one of those compuetr chairs when u hit the elevation knob down its soo cool

ineedpal · #21 Post by **ineedpal** » Tue Dec 20, 2005 11:02 pm

me too I want one, but with 5 plastic "spacers"

... I really don't have any equipment to make a hole exactlly at the center

On/Scene Tactical · Tue Dec 20, 2005 11:51 pm

MM...

Ohhh Hell Ya!!!

I want 2 for 2240,, and need another for my D350

Can you make me one for that ???

Actually I need to talk with you about something....

Awesome work!!!

ttyle

Eric....

Aaron · #23 Post by **Aaron** » Wed Dec 21, 2005 12:14 pm

its now on my gun and i have a pic they just have to be developed
looks sick and the scopes on all i need to get is the Cr breech and its done
almost at 850 fps. i loooovvvveeee it ........takking her hunting christmas day!!

simko · #24 Post by **simko** » Wed Dec 21, 2005 12:23 pm

how did tyou get your 2289 going that fast?

Aaron · #25 Post by **Aaron** » Thu Dec 22, 2005 12:01 pm

longer barrel adds 20 fps per inch, and all internalmods and any other possible mod u can do

killercrow · #26 Post by **killercrow** » Thu Dec 22, 2005 12:57 pm

your getting those numbers from a chronograph? or your just estimating based on your theory of 20 fps per inch?

Aaron · #27 Post by **Aaron** » Thu Dec 22, 2005 3:13 pm

f 1 chrono

LarryS · #28 Post by **LarryS** » Fri Dec 23, 2005 10:59 pm

Metalmuncher49, It _is_ fun making super efficient "brakes", "Flame Suppressors", and such to protect our enviornment, isn't it!.

Since I like working in close tolerances on brakes..... I need to get another brass rod slightly larger than 0.22 (5.5mm) and lathe it down to a flush fit without play in the barrel a few inches.... with a cutoff end just past the exit hole on the "brake" to inspect "Flame arresting" cylinder for dead centering to the bore.

The cheap hardware store brass rods are excellent for pushing a cleaning patch thru the barrels and pushing out pellets that got bent or whatever.

The Thumps and Puffs I get are clear proof of flame extinction.

-LarryS

ineedpal · #29 Post by **ineedpal** » Wed Dec 28, 2005 1:11 am

hey metalmuncher, I found some 1inch ID copper tube, can you make barrel adaptor ,front cap and baffles for it?

slaviainjection · #30 Post by **slaviainjection** » Thu Jan 12, 2006 4:00 pm

Would that be just for cosmetics? Or do these things actually have a place on a springer (slavia 630)? Thanks in advance.

Canadian Airgun Forum

Low tech Brakes

that looks great