Are ther any mods for the gamo delta?

[link_dc]

Do you know of any? and how would i get it to its un-detuned version? its not that much more than it is, but how would i get it there?

[RM422]

I'll let you in on a little secret. It says the american version is 525fps. Well an airgun company wont detune a gun by 25fps. So all they do is slap 495fps on the box and say here ya go. A way to make it even more powerful would probably be to put a stronger spring in it. Did you ever put the quest 1000 piston in your quest 500?

[RM422]

Also I'm pretty sure that they don't even detune airguns that have a 100-200fps difference from the canadian regulation because it would cost too much money. so what they do is test them with heavier pellets before they come to canada and the canadian government allows that. A gunsmith told me that. Because the Diana24 in america in .177 cal is rated for 700fps. And on my Diana24 box it says certified for under 500fps with 10.6gr H&N Baracuda pellets. But when I load it with standard 7.9 gr crosman pointed pellets I can tell it's doing quite a bit over 500fps.

[link_dc]

I'll let you in on a little secret. It says the american version is 525fps. Well an airgun company wont detune a gun by 25fps. So all they do is slap 495fps on the box and say here ya go. A way to make it even more powerful would probably be to put a stronger spring in it. Did you ever put the quest 1000 piston in your quest 500?

Cool! are you sure? becuase i dont want to be disapointed when i get my chrony. On the box, mine says 490 fps though. And no i havent gotten the piston yet, but when i get it, what do i use to lube the stuff inside? and what exactly do i put it on? the spring?

[RM422]

Yep I'm sure. Well as for lube superlube or moly lube works best. You should grease you spring and piston with it. Just make sure you clean all the old grease off first.