just replaced last pic this one is better
what i have done is i had to make a slot for the hammer pin to slide in so it can be cocked , i took a hammer from a 1975 powermaster 760 had to cut it down a bit ...and a 2240 hammer spring and made my own cocking pin i had to drill the hole in the hammer my self plus i added in a 2240 breech and 2260 rifle bolt and probe.i also reattached the cocking button as well with a bolt.. thats it so far i still got refinish the gun yet and make a metal site for it. i gota get inventive there but ill do it eventually the color ofthe gun as its seen has to do more with the sun light in my room hitting the gun the tube right now is bare metal still iam thinking of polishing it and the barrel the same and re painting the grip and putting on wooden grips and pump arm ....
