Which Pellet Do You Recomend?

This is the place to talk about everything airgun related including air rifles, air pistols, pellet guns, pcp airguns and more.
Post Reply
Message
Author
User avatar
randyhub
Posts: 4913
Joined: Thu Sep 01, 2005 1:45 pm
Location: Calgary

#16 Post by randyhub »

Here is the link with all the secrets.

http://crosmanmods.cjb.net
Top
User avatar
ABshooter
Posts: 4438
Joined: Sun Nov 06, 2005 8:26 pm
Location: Southern Alberta
Contact:
Contact ABshooter

#17 Post by ABshooter »

Thanks for the help. Is that the method you use??
Image

Hey, don't hate. It releases negative energy, which is bad for everyone.
Top
User avatar
randyhub
Posts: 4913
Joined: Thu Sep 01, 2005 1:45 pm
Location: Calgary

#18 Post by randyhub »

Yes it works well, just do it slowly and take your time. I added a 14" crowned barrel to my 2240, did the shown valve work, 2289 hammer spring, extended bolt probe, transfer port, and bulked it and it is a very accurate hardhitting airgun now. :)

Randy
Top
Gotrice23
Posts: 1839
Joined: Mon Dec 19, 2005 9:19 pm
Location: British Columbia

#19 Post by Gotrice23 »

randyhub wrote:Yes it works well, just do it slowly and take your time. I added a 14" crowned barrel...
Randy
Why not a 24" barrel?
Top
User avatar
randyhub
Posts: 4913
Joined: Thu Sep 01, 2005 1:45 pm
Location: Calgary

#20 Post by randyhub »

24" makes the gun way too long for packing in dense bush and all my shooting is under 40 yards which my 2240 with the 14" barrel handles quite nicely. Anything over I use my .22 Patriot doing 920 FPS which works quite nicely to 70 yards. Remember if you do all the mods a 14" barrel will yield good performance.

Here is a pic of my 2240 with a fake suppressor but you have most likely already seen it.

http://i21.photobucket.com/albums/b278/ ... 0final.jpg
Top
Gotrice23
Posts: 1839
Joined: Mon Dec 19, 2005 9:19 pm
Location: British Columbia

#21 Post by Gotrice23 »

randyhub wrote:24" makes the gun way too long for packing in dense bush and all my shooting is under 40 yards which my 2240 with the 14" barrel handles quite nicely. Anything over I use my .22 Patriot doing 920 FPS which works quite nicely to 70 yards. Remember if you do all the mods a 14" barrel will yield good performance.

Here is a pic of my 2240 with a fake suppressor but you have most likely already seen it.

http://i21.photobucket.com/albums/b278/ ... 0final.jpg
Did you use the 2289g barrel, or cut the 24" barrel?
Top
User avatar
randyhub
Posts: 4913
Joined: Thu Sep 01, 2005 1:45 pm
Location: Calgary

#22 Post by randyhub »

2250 barrel from D&L Airguns think it was 18 dollars.
Top
User avatar
Joben
Posts: 129
Joined: Sat Dec 03, 2005 11:50 pm
Location: Connecticut USA
Contact:
Contact Joben

Re: Which Pellet Do You Recomend?

#23 Post by Joben »

Gotrice23 wrote:Well, I'm almost out of .22 pellets. Time to buy some more! What do you guys recommend? I'm using them to plink and shoot targets so a diablo, or wadcutter would be very suitable. And if you guys really need to know, I'm using them just for my 2240, I don't have any other .22 airguns.

The various RWS pellets i have had are of excelent quality, and have all been very accurate.

My 2250 shoots well with their H-Points.

Their Hobby pellets are quite cheap, though i've only had those in .177
Top
Post Reply

Return to “General Airgun Chat”