Some questions

[ABshooter]

Will The EZ Air Bottom Drop ( http://www.cooper-t.com/sheridan.html ) work in a 2240? And what you have to do is drill a hole in the middle of the main tube, unscrew the ASA adapter from the dummy, put the dummy in the main tube, with hole in the tube and the hole in the dummy lined up, and screw the ASA adapter back in, then screw a CO2 tank into the ASA adapter, and you have a bulked 2240????? Is there any way I can make the 2250 Bulk Kit ( http://www.cooper-t.com/airguns.html ) fit a 2240?? Thanks for hearing me out. Please help,

[airbuddy3]

Why would you need a dummy , that would be for gun that has no tube like the 357 /38 ect , why not put the line straight into the tube..?

Frank

[ABshooter]

No idea. I don't know anything about bulking.

[randyhub]

I would not drill the tube, order a bulb eliminator from Cooper-T for 25 USD, than do a remote or ASA feed line. Here is mine, very easy conversion and required if you mod the valve.

Randy

http://i21.photobucket.com/albums/b278/ ... 0final.jpg

[sniper]

YES, all you need to ask cooper-t is the 2240 powerlet eliminator for the 2250 bulk system.

[ABshooter]

So I tell them "I want a 2250 Bulk Kit, but with the 2240 eliminator". ??