bulk fill qb-78....or pcp fill
bulk fill qb-78....or pcp fill
can you get an adapter to let the qb to be filled with a pcp pump?
and if so what fill would it be ?( like up to 100 bar?)
how do you fill with the bulk fill from sniper?
and if so what fill would it be ?( like up to 100 bar?)
how do you fill with the bulk fill from sniper?
Bulk fill and PCP not to be confused. Very different systems
Ed, the QB is a CO2 gun and the Chinese tubes are made for that pressure say 1200. More and you are pushing the envelope.
The angle bulk fill is a copy of the Crosman system that used the tank with a 1/8" straight thread on it.
I kinda wish PCP was a term used only on guns designed for HPA and not the pumping up of CO2 guns with air. Bad combination of terms and one that could lead to accidents.
Walter....
The angle bulk fill is a copy of the Crosman system that used the tank with a 1/8" straight thread on it.
I kinda wish PCP was a term used only on guns designed for HPA and not the pumping up of CO2 guns with air. Bad combination of terms and one that could lead to accidents.
Walter....
Walter
Jester, are you referring to my post as nonsense?Jester wrote:Nonsense!
The QB shoots really well when converted to HPA. I've had the pleasure of shooting Sniper's HPA QB and it's very nice. Ask him for more details on it.
A QB converted to HPA is a totally different gun than filling a CO2 QB with air.
I have made QB PCPs for some time now and know what it takes.
Be Safe,
Walter....
Walter
Re: bulk fill qb-78....or pcp fill
Hi Ed,edholton wrote:can you get an adapter to let the qb to be filled with a pcp pump?
and if so what fill would it be ?( like up to 100 bar?)
how do you fill with the bulk fill from sniper?
Yes, you can install adpt to pump your QB with your Hill.
So far I'm happy with 100 bars and get about 23 good consistent shots
with fully mod QB, I know there some guys here had tried even further,
I've done some exp. too.
All you need is attached a male fitting on the bulk and female quick disconnect
on your hose to the Hill.
I guess the bet is that if you look for it at hydrolic or pneumatic store atedholton wrote:well i have the female for the pump....airarms comes standard with it...i would need a male end for the bulk fill.
so who has those up here ?
your local but the problem is that they hardly carry anything BSPP as
your AA probably have.
Go to Tuthill Corporation and do a dealer search for your area/provinceedholton wrote:well i have the female for the pump....airarms comes standard with it...i would need a male end for the bulk fill.
so who has those up here ?
You can get the 1/8"NPT and BSPP from them in 1/8" straight through coupling pt# B1-T10 FOR npt brass male, pt # B1-T10BS for 1/8-28 BSPP
good for 2800 so pump to your hearts content.
Walter.....
www.coupling.tuthill.com
Walter