Scope rings that wont creep?

Message

Wrong Way · #1 Post by **Wrong Way** » Sun Apr 23, 2006 5:12 pm

Hey all. I need a set of rings to mount a 1" scope onto a slightly undersized 3/8" dovetail (russian) that I can crank the hell out of so they won't creep with recoil (going on a .22/.410 over-under). I don't want to spend a million dollars and I want them here yesterday..........Any suggestions?

Ryan

ETA · #2 Post by **ETA** » Sun Apr 23, 2006 5:26 pm

BKL double straps. The last set you will ever need. Not cheap.
From D&L, BKL factory direct, US dealers, etc.

edholton · #3 Post by **edholton** » Sun Apr 23, 2006 7:24 pm

that is a standard firearm a 22 LR with a 410 shotgun
under.......any good rings should fit....those gins don,t recoil the same as an airgun...a good set of millet rings should work just fine!

Wrong Way · #4 Post by **Wrong Way** » Sun Apr 23, 2006 8:06 pm

I almost picked up a set of Millets.......40 bucks though. Guess I might have to bite the bullet. I know the standard .22 rings weren't holding worth a damn when I started putting 3" slugs through the .410 bore.

Ryan

Allan · #5 Post by **Allan** » Sun Apr 23, 2006 8:58 pm

how the flip is the Slug 3" long?!!? or is that the whole cartridge. lol

Wrong Way · #6 Post by **Wrong Way** » Sun Apr 23, 2006 9:12 pm

.410 guage shell= 3" long, 1/4oz slug=1/2" long.

Ryan

edholton · #7 Post by **edholton** » Sun Apr 23, 2006 9:35 pm

the only way to stop it from moving if the rings will
not hold is to get it drilled and taped for a weaver rail ...then it will never move!