...Sorry guys, I'm just excited now that it's official
WOOHOO!
WOOHOO!
I just got off the phone with John at D&L, and my HW100T will be here in 5 or 6 days... I CAN'T WAIT. Also picked up the SCUBA tank today, and I was pleasently surprised - the lady in Kitchener shop I went to already knew about PCP guns and knew exactly what to set me up with. Thanks again to those of you who helped answer my questions.
...Sorry guys, I'm just excited now that it's official
...Sorry guys, I'm just excited now that it's official
Right on Jester!
By the way, where in Kitchener is this place that you bought your tank and if you don't mind, either send me a PM or post the total cost of the tank and accessories.
I want to get into the PCP mode with air rifles but I'd like to get a idea of the cost for everything.
Take care,
NIGHTHAWK
By the way, where in Kitchener is this place that you bought your tank and if you don't mind, either send me a PM or post the total cost of the tank and accessories.
I want to get into the PCP mode with air rifles but I'd like to get a idea of the cost for everything.
Take care,
NIGHTHAWK
Here, I posted the info in the "Where to buy" section:
http://www.airgunforum.ca/forum/viewtop ... 0400#30400
My tank is 80cf @ 3000psi. It came with the DIN 200/232 female fitting, with an adapter to convert it to k-type as well. Brand new the tank was $249. They also had used tanks of the same size for (I think) $149.
Other PCPs use the k-type, but you'll also need a "yoke", hose and pressure gauge - I think all that is usually around $150 on top of the tank. Since the HW100 cylinder has an integrated pressure guage, I don't need all that extra stuff - just the tank and the gun (the gun comes with a DIN adapter to connect the cylinder directly to the DIN on the SCUBA tank)
http://www.airgunforum.ca/forum/viewtop ... 0400#30400
My tank is 80cf @ 3000psi. It came with the DIN 200/232 female fitting, with an adapter to convert it to k-type as well. Brand new the tank was $249. They also had used tanks of the same size for (I think) $149.
Other PCPs use the k-type, but you'll also need a "yoke", hose and pressure gauge - I think all that is usually around $150 on top of the tank. Since the HW100 cylinder has an integrated pressure guage, I don't need all that extra stuff - just the tank and the gun (the gun comes with a DIN adapter to connect the cylinder directly to the DIN on the SCUBA tank)
Last edited by Jester on Mon Apr 24, 2006 3:17 pm, edited 1 time in total.
No, Dean's Sport and Dive (see above) but it is on Victoria street, I wonder if it's been re-named?.
For sure, send me an e-mail and we'll take it out and play
I forgot to mention about Dean's Diving - if you go there, you have to drive around behind the building to find it... it took me a while to realize that, and there's no signs out front. Also check the hours first, they don't open until noon and are closed on Wednesdays.
For sure, send me an e-mail and we'll take it out and play
I forgot to mention about Dean's Diving - if you go there, you have to drive around behind the building to find it... it took me a while to realize that, and there's no signs out front. Also check the hours first, they don't open until noon and are closed on Wednesdays.
tony you can get a tank just over near my store atNIGHTHAWK wrote:Right on Jester!
By the way, where in Kitchener is this place that you bought your tank and if you don't mind, either send me a PM or post the total cost of the tank and accessories.
I want to get into the PCP mode with air rifles but I'd like to get a idea of the cost for everything.
Take care,
NIGHTHAWK
scuba 2000 he knows (alax) about paintball and air guns as well!....there on leslie street between hwy 7 and the 16th ave!