Upgrade spring for Slavia 630!
Upgrade spring for Slavia 630!
Just located a piston and breech seal for my 630, but want to upgrade the spring! Have heard that I could use a Crosman Phantom spring as replacement? Can any of you guys/gals confirm this, and how many coils need to be clipped to have it work smoothly?
Thanks for any input!
Thanks for any input!
"Lust is the craving for salt of a man who is dying of thirst"
-Frederick Buechner-
-Frederick Buechner-
Re: Upgrade spring for Slavia 630!
Think it is too big in diameter to fit.REPOOC wrote:Just located a piston and breech seal for my 630, but want to upgrade the spring! Have heard that I could use a Crosman Phantom spring as replacement? Can any of you guys/gals confirm this, and how many coils need to be clipped to have it work smoothly?
Thanks for any input!
Walter
- Dukemeister
- Posts: 4327
- Joined: Fri Jan 22, 2010 1:17 pm
- Location: Kingston, ON
Re: Upgrade spring for Slavia 630!
I did some digging into Slavia 630/631 springs a while back when I got mine. I believe the HW30S spring will fit, no idea of the power. I am happy enough with my stock spring. After a lube tune it spits standard pellets at 500 fps, so its good enough for me.
))))----//----------==
Iacio, ergo sum
Re: Upgrade spring for Slavia 630!
Not really interested in more power just that the stock spring has crapped out on me! Thanks Walter, I think you might just be right about the dia. of a Phantom spring being to large. Thanks for the heads up on a HW30S spring Dave. Will definately look into it.Dukemeister wrote:I did some digging into Slavia 630/631 springs a while back when I got mine. I believe the HW30S spring will fit, no idea of the power. I am happy enough with my stock spring. After a lube tune it spits standard pellets at 500 fps, so its good enough for me.
"Lust is the craving for salt of a man who is dying of thirst"
-Frederick Buechner-
-Frederick Buechner-
- paddyfritz
- Posts: 3452
- Joined: Wed Jul 01, 2009 4:23 pm
- Location: Northern Ontario
Re: Upgrade spring for Slavia 630!
Phantom wont fit. Way too big.
Search here as I posted contact info for a USA supplier.
Search here as I posted contact info for a USA supplier.
"The tree of liberty must be refreshed from time to time with the blood of patriots and tyrants." - Thomas Jefferson.
-
- Posts: 4
- Joined: Thu Aug 09, 2012 8:37 pm
Re: Upgrade spring for Slavia 630!
Well i just did a spring and piston seal replacement last week, got it from D&L spring was $7 and the seal $15
#2 Utility Mainspring is the one that worked fine, I did have to compress it tho but was easy enough no need to trim it at all
it is the right size and coil count
#2 Utility Mainspring is the one that worked fine, I did have to compress it tho but was easy enough no need to trim it at all
it is the right size and coil count
-
- Posts: 4
- Joined: Thu Aug 09, 2012 8:37 pm
Re: Upgrade spring for Slavia 630!
PS: it is more powerfull too, phonebook test from 15 feet
before pellet went in 50 ish pages
after 80 ish
before pellet went in 50 ish pages
after 80 ish
Re: Upgrade spring for Slavia 630!
Thanks for the update jimbospocs. I may have to get a #2 utility spring from D&L as well!
"Lust is the craving for salt of a man who is dying of thirst"
-Frederick Buechner-
-Frederick Buechner-
- SmokelessBonez
- Posts: 496
- Joined: Thu Aug 09, 2007 9:32 pm
- Location: Alberta
Re: Upgrade spring for Slavia 630!
I have had D&L #3 in mine for a few years now works great, good power.
Re: Upgrade spring for Slavia 630!
Has anyone put the replacement spring through a chronograph? My stock slavia 630 that is about 9 years old is spitting crosman premier hollowpoints out at an average of 523.5 ft/s.
- paddyfritz
- Posts: 3452
- Joined: Wed Jul 01, 2009 4:23 pm
- Location: Northern Ontario
Re: Upgrade spring for Slavia 630!
If you are looking for PAL power, a 634 spring should fit. They are rated at 720 fps
"The tree of liberty must be refreshed from time to time with the blood of patriots and tyrants." - Thomas Jefferson.