modding a 2240.
modding a 2240.
i want to buy a 2240 and to mod it, metal breech, longer barrel about 12', wood grips and a muzzle break, but where could i get those? i know the crosman metal breech but is it the only one who sell after market breech?
any one have price or website?
any one have price or website?
check this out:
http://www.airgunforum.ca/forum/viewtoph.470-s0.html
Info from Plink-Panther, there is a good deal from CR Steel Breech package for $ 36 CAD part # 2240SBPK, it's the best price around.
or www.crookedbarn.com
The next longer barrel you will find is 14.5" to be exact but you can always cut it back to 12" and re-crown it.
Muzzle Brake:
http://www.airgunforum.ca/forum/viewtopic.465.html
http://www.airgunforum.ca/forum/viewtoph.470-s0.html
Info from Plink-Panther, there is a good deal from CR Steel Breech package for $ 36 CAD part # 2240SBPK, it's the best price around.
or www.crookedbarn.com
The next longer barrel you will find is 14.5" to be exact but you can always cut it back to 12" and re-crown it.
Muzzle Brake:
http://www.airgunforum.ca/forum/viewtopic.465.html
14 barrel
Go with the Crosman 2250 upgrade kit from John at D&L Airguns and do the transfer port, valve mods, don't forget the 2289 hammer spring, I converted to bulk as you can shoot all weeknd for 2 bucks! Email at rthub@shaw.ca if you want pics of my killer 2240 Carbine conversion.
Randy
Randy
- supersundance
- Posts: 351
- Joined: Fri Sep 09, 2005 9:21 pm
- Location: ontario, canada
2240
you can put a 24 inch barrel on a 2240 and run over 700 fps with the right mods to it.
Here is an excellent Modding Guide for the 2240, by American Airgun Hunter:
http://www.americanairgunhunter.com/crossman1.html
Just click this ">" button to flip to the next page.
http://www.americanairgunhunter.com/crossman1.html
Just click this ">" button to flip to the next page.
- Time-Bandit
- Posts: 146
- Joined: Mon Oct 10, 2005 4:54 pm
- Location: Montreal, Quebec
- Contact:
Yeah, it's an awesome link, and I will definitely do some of the mods that are in there. I was wondering though, and excuse me if I am asking a question that has already been asked before, but where does one order parts in Canada for Crosman?
I went on the Crosman Canada site and it's just a page with an address and phone number, do I contact them directly to order my parts or do I have to contact a dealer? I am located in Montreal...
I'm thinking of doing some basic mods to my 2240.
But most importantly, I find that the 2240 is too loud for my taste, are there any type of silencers available?
I went on the Crosman Canada site and it's just a page with an address and phone number, do I contact them directly to order my parts or do I have to contact a dealer? I am located in Montreal...
I'm thinking of doing some basic mods to my 2240.
But most importantly, I find that the 2240 is too loud for my taste, are there any type of silencers available?
Hello there & welcome to the group. You can buy the parts directly from Crosman Depot in Peterborough or from D&L Airgun in BC. There should be parts numbers listed here somewhere on the forum. Also, you can find many Crosman schematics here:
http://www.crosman.com/site/pistols_man
http://www.crosman.com/site/rifles_man
We don't discuss silencers or moderators here please....
http://www.crosman.com/site/pistols_man
http://www.crosman.com/site/rifles_man
We don't discuss silencers or moderators here please....
- supersundance
- Posts: 351
- Joined: Fri Sep 09, 2005 9:21 pm
- Location: ontario, canada
2240
That specific gun was not bulked but this one is....
so is this one...
so is this one...
- supersundance
- Posts: 351
- Joined: Fri Sep 09, 2005 9:21 pm
- Location: ontario, canada
hpa
hpa is very simple to run and lets you play all winter. I bought a cooper-t fake co2 then just buy a remote line then a asa adaptor and a hpa tank and your good to go. You will get a crazy amount of shots out of a 48 cubic inch tank and you can buy a paintball belt to hold it for ya. remember boys and girls paintball shops are our friends, they have many many awesome things that will work on our guns. you can even fit some electronic triggers on a 22xx gripframe