Need a hammer spring for my 2289!!

This is the place to talk about everything airgun related including air rifles, air pistols, pellet guns, pcp airguns and more.
Post Reply
Message
Author
User avatar
Wrong Way
Posts: 1795
Joined: Fri Sep 02, 2005 7:34 am
Location: Penetang, ON.

Need a hammer spring for my 2289!!

#1 Post by Wrong Way »

Anyone have a cheap and easy replacement idea? I would prefer to go stronger than stock if possible.

Ryan
User avatar
sniper
Admin-2-IC
Posts: 9769
Joined: Thu Sep 01, 2005 6:19 pm
Location: On, CA
Contact:

#2 Post by sniper »

I don't if this will work for you. I had the replacement spring on the picture installed in one of my 2240 and it was cut to size and stretched a bit since it was very strong spring, it fitted nicer and tighter than the original but one problem was the spring was so strong it was blowing too much co2 out of the barrel. I got the spring from PrincessAuto and it came in a bag (about 200 springs) with a bunch of different sizes for $ 2.99.


Image
Post Reply