Retained air-2100-13-XX conversion

For everything modification and repair related post here.
Message
Author
User avatar
rsterne
Posts: 9528
Joined: Sat Nov 03, 2007 5:19 pm
Location: Coalmont BC

Re: Retained air-2100-13-XX conversion

#61 Post by rsterne »

Try a little less hammer strike to lower the first shot and raise the second shot.... assuming the second shot is dumping all remaining air?....

Bob
Dominion Marksman Silver Shield - 5890 x 6000 in 1976, and downhill ever since!
Airsonal; Too many! Springers, Pumpers, CO2, but I love my PCPs and developing them!
Proud Member of the 2000+fps Club!
User avatar
Doc Sharptail
Posts: 2767
Joined: Wed Oct 17, 2007 4:27 am
Location: Winnipeg, Canada

Re: Retained air-2100-13-XX conversion

#62 Post by Doc Sharptail »

Yes, the 2nd shot is the dumper.

With the rva out any further, velocity on the first shot starts to wander. It's not by a lot~ 40-60 fps. I'd much rather have the consistency on the first shot. Could probably cure that with a different hammer spring...

Noticed the 2100 hammer spring is larger diameter than the 13-XX and Disco hammer springs. It's not by a lot- the step on the front of the rva still holds it fine, and no problems with it in the hammer end either.

I'll get it out Friday and see if I can back down a little more. I actually like where the rifle is performing now.

-D.S.
"Ain't no half-way"
-S.R.V.
User avatar
wesb2007
Posts: 3981
Joined: Sat Nov 05, 2016 11:52 am
Location: Caronport, Saskatchewan
Contact:

Re: Retained air-2100-13-XX conversion

#63 Post by wesb2007 »

Nice performance! My 2200 tube and pump linkage just came today. Will probably be awhile before I get to work on it, but looking forward to it!

Sent from my LG-H812 using Tapatalk
Website: https://airgunarcheryfun.ca/
Post Reply