I pulled out the BW2 for the first time in long long time and at first it cycled just fine then stopped returning to full battery consistently if at all.
It will do so all the time with an empty mag in it but load BBS and it hangs up on the top of the Mag it seems (and not just with one mag but 2 different ones). Can the slide spring just be going flat?
Any had this after leaving a 1911 sit for while?
Blackwater 2 wont return to full battery consitently
-
Plinkercases
- Posts: 4030
- Joined: Wed Jul 24, 2013 10:13 am
- Location: Toronto
- Contact:
Blackwater 2 wont return to full battery consitently
Keep you powder dry and your seals oiled.
Shoot straight and safe.
http://plinkercases.ca/
Shoot straight and safe.
http://plinkercases.ca/
Re: Blackwater 2 wont return to full battery consitently
Plinkercases,
A couple questions:
1. Is the BB feed arm on the nozzle bent sideways or upwards?
2. Is it double feeding BBs?
3. Does it still hang if you are pushing up firmly on the bottom of the mag?
ColdAir
A couple questions:
1. Is the BB feed arm on the nozzle bent sideways or upwards?
2. Is it double feeding BBs?
3. Does it still hang if you are pushing up firmly on the bottom of the mag?
ColdAir