Crosman p1322 mod help ... please :)

[xcalibreplcp]

Hi Everyone,

I recently got a Crosman p1322 (it's near identical to the 1377/1322).

.117 Cal

I wanted to modify the pistol while being aware to keep it below 500 FPS to ensure its compliant with Canadian law.

Basically I just want to swap the parts for something nice looking and sturdy.

I can't seem to find any polished barrels or breeches.

Also interested in a good scope. suggestions?

I've only had it a few days and the pumper feels like it could be a tiny bit more sturdy. Any suggestions?

Would love a folding wire stock.

Google hasn't been much help TBH because I'm still a noob.

Would you be kind enough to help me with my mod?

I'll post progess pics

Thanks in advance

[leadslinger]

Polish the barrel yourself. CLR takes away bluing pretty good. Then just need some metal polish and some time.

[wesb2007]

BNM have chrome breeches and other colors, can get multi shot repeater breeches. Expensive though! https://www.bnmcustom.com/product/bmwr2002/

Sent from my LG-H812 using Tapatalk

[wesb2007]

Lots of guys like those compact utg bugbuster scopes with adjustable objective. $125 on Amazon. Were you looking for a silver/polished aluminum scope?
I've got a 3-9 x30 Simmons polished silver scope and rings. It doesn't have an adjustable objective but I was able to turn the ring on the end of the scope to get the objective focused to about 20-25 yards from 100. Looks nice works well. I might be willing to sell it if you wanted it.

Sent from my LG-H812 using Tapatalk

[wesb2007]

Oops sorry it's 3-9x40. Selling for 109 on Amazon, but I got it cheaper and would sell mine for less than half that. A smaller scope might suit you better though, their is a silver 3-9X32 Simmons on Amazon for $66. I'd recommend an adjustable objective though or just a simple 4 x 32 airgun scope, though I am not an expert by any means. I'm sure others will have better advice!

Sent from my LG-H812 using Tapatalk

[xcalibreplcp]

Polish the barrel yourself. CLR takes away bluing pretty good. Then just need some metal polish and some time.

Ill definitely try it. but I'm looking for a longer barrel 18"

Sent from my SM-N920W8 using Tapatalk

[wesb2007]

Alliancehobby.com has 18" polished barrels for $60 US shipping included, awful expensive. You can get an 18" barrel from scopesandammo.com or canadashootingsupply.ca for quite a bit less and polish it yourself as leadslinger mentioned. Apparently guys also buy the blued crosman breeches and clr them and polish them as well. Those websites sell the blued steel breeches as well. Alliancehobby.com may sell the polished breeches as well, since they sell polished barrels and polished pump tubes. I didn't see them, but they probably do. If you buy it all from them, might save you some on shipping. This hobby gets awful expensive! They say that the 1377 is the most expensive airgun you'll ever buy, lol, because of all the expensive custom parts.

Sent from my LG-H812 using Tapatalk

[xcalibreplcp]

BNM have chrome breeches and other colors, can get multi shot repeater breeches. Expensive though! https://www.bnmcustom.com/product/bmwr2002/

Sent from my LG-H812 using Tapatalk

thanks ill check it out!

Sent from my SM-N920W8 using Tapatalk

[xcalibreplcp]

Oops sorry it's 3-9x40. Selling for 109 on Amazon, but I got it cheaper and would sell mine for less than half that. A smaller scope might suit you better though, their is a silver 3-9X32 Simmons on Amazon for $66. I'd recommend an adjustable objective though or just a simple 4 x 32 airgun scope, though I am not an expert by any means. I'm sure others will have better advice!

Sent from my LG-H812 using Tapatalk

thank you

Sent from my SM-N920W8 using Tapatalk

[xcalibreplcp]

what about a wire type stock ?

Sent from my SM-N920W8 using Tapatalk

[wesb2007]

http://www.gmaccustomparts.com/epages/B ... cale=en_GB
There's some. Probably other places too. I think canadashootingsupply.ca is actually a distributor for GMAC custom parts so they might be able to get these as well.

Sent from my LG-H812 using Tapatalk

[xcalibreplcp]

http://www.gmaccustomparts.com/epages/BT3197.mobile/en_GB/?ObjectPath=/Shops/BT3197/Categories/Crosman_Wood_Pistol_Grips/Tippmann_Stocks&Locale=en_GB
There's some. Probably other places too. I think canadashootingsupply.ca is actually a distributor for GMAC custom parts so they might be able to get these as well.

Sent from my LG-H812 using Tapatalk

thank you. looking into it

Sent from my SM-N920W8 using Tapatalk

[wesb2007]

I look forward to seeing how it turns out for you, post some pics when you are done! [emoji6]

Sent from my LG-H812 using Tapatalk