Anyone ever tried a S&W M&P 40 co2 Blowback bb pistol (KWC)?
-
- Posts: 14
- Joined: Fri Aug 31, 2012 10:05 pm
Anyone ever tried a S&W M&P 40 co2 Blowback bb pistol (KWC)?
Has anyone ever tried a KWC Smith & Wesson M&P 40 co2 blowback air pistol?
How was it?
I can't find its video on youtube.
How was it?
I can't find its video on youtube.
Re: Anyone ever tried a S&W M&P 40 co2 Blowback bb pistol (K
I can't speak for the 4.5mm version but the 6mm airsoft model runs very well.
Re: Anyone ever tried a S&W M&P 40 co2 Blowback bb pistol (K
Semi auto / full auto...
Oh , I'd like to find out more too
Oh , I'd like to find out more too
-
- Posts: 14
- Joined: Fri Aug 31, 2012 10:05 pm
Re: Anyone ever tried a S&W M&P 40 co2 Blowback bb pistol (K
How's the recoil of the 6mm airsoft version?PZAM wrote:I can't speak for the 4.5mm version but the 6mm airsoft model runs very well.
Trying to find how the recoil is for the 4.5mm
Thanks for reply.
-
- Posts: 14
- Joined: Fri Aug 31, 2012 10:05 pm
Re: Anyone ever tried a S&W M&P 40 co2 Blowback bb pistol (K
I'm trying to find out more about it too, however I don't see there is any video out there, on youtube, there's only the nbb version.Bbqznbeer wrote:Semi auto / full auto...
Oh , I'd like to find out more too
Re: Anyone ever tried a S&W M&P 40 co2 Blowback bb pistol (K
I got one and for the finish it's beautiful. Grip is interchangable, 3 size small, medium and large. For me medium is the right size, large would be nice for large hand.
Blowback is hard, in the same category as the kwc 1911. Accuracy is average for a BB. When I tried it, it was shooting low and left, but I think it's me, can't tell for dure. I get the same result with my gsg92 and sig p320.
Mine has a problem with the mag, goes a bit to deep inside and the co2 nozzle hit's the back of the rear lips, causing it to jam half open. Filed it slightly down, need's to be tested next spring. If that cure the problem it will be a fun gun...
Blowback is hard, in the same category as the kwc 1911. Accuracy is average for a BB. When I tried it, it was shooting low and left, but I think it's me, can't tell for dure. I get the same result with my gsg92 and sig p320.
Mine has a problem with the mag, goes a bit to deep inside and the co2 nozzle hit's the back of the rear lips, causing it to jam half open. Filed it slightly down, need's to be tested next spring. If that cure the problem it will be a fun gun...
4.5mm
To many and not enough.
6mm
Not enough and to many.
To many and not enough.
6mm
Not enough and to many.
-
- Posts: 14
- Joined: Fri Aug 31, 2012 10:05 pm
Re: Anyone ever tried a S&W M&P 40 co2 Blowback bb pistol (K
Is the one you got the KWC M&P 40 co2 Blowback air pistol(model: KMB-48AHN)?silentman wrote:I got one and for the finish it's beautiful. Grip is interchangable, 3 size small, medium and large. For me medium is the right size, large would be nice for large hand.
Blowback is hard, in the same category as the kwc 1911. Accuracy is average for a BB. When I tried it, it was shooting low and left, but I think it's me, can't tell for dure. I get the same result with my gsg92 and sig p320.
Mine has a problem with the mag, goes a bit to deep inside and the co2 nozzle hit's the back of the rear lips, causing it to jam half open. Filed it slightly down, need's to be tested next spring. If that cure the problem it will be a fun gun...
Re: Anyone ever tried a S&W M&P 40 co2 Blowback bb pistol (K
We noticed this on one example but after a bit of "rodage" it seemed to so sort itself out.silentman wrote:Mine has a problem with the mag, goes a bit to deep inside and the co2 nozzle hit's the back of the rear lips, causing it to jam half open. Filed it slightly down, need's to be tested next spring. If that cure the problem it will be a fun gun...
-
- Posts: 14
- Joined: Fri Aug 31, 2012 10:05 pm
Re: Anyone ever tried a S&W M&P 40 co2 Blowback bb pistol (K
Hi, is the one you using the KWC M&P 40 co2 Blowback, model: KMB-48AHN?PZAM wrote:We noticed this on one example but after a bit of "rodage" it seemed to so sort itself out.silentman wrote:Mine has a problem with the mag, goes a bit to deep inside and the co2 nozzle hit's the back of the rear lips, causing it to jam half open. Filed it slightly down, need's to be tested next spring. If that cure the problem it will be a fun gun...
Thanks.
Re: Anyone ever tried a S&W M&P 40 co2 Blowback bb pistol (K
In this case the KCB48-AHN (this denotes the airsoft version) with full S&W trademarks as licensed by CybergunHi, is the one you using the KWC M&P 40 co2 Blowback, model: KMB-48AHN?
-
- Posts: 14
- Joined: Fri Aug 31, 2012 10:05 pm
Re: Anyone ever tried a S&W M&P 40 co2 Blowback bb pistol (K
How's the recoil performance of this KCB-48AHN airsoft? Can't find any related vids on youtube either for this airsoft version.PZAM wrote:In this case the KCB48-AHN (this denotes the airsoft version) with full S&W trademarks as licensed by CybergunHi, is the one you using the KWC M&P 40 co2 Blowback, model: KMB-48AHN?
Re: Anyone ever tried a S&W M&P 40 co2 Blowback bb pistol (K
Here's one: https://www.youtube.com/watch?v=sWEFz_xZRds
There are a lot more on youtube if you search for "Cybergun" or "Palco" instead of KWC.
KWC is the manufacturer of all of these pistols however when they appear with full trademarks it is because they are marketed through Cybergun/Palco - apart from this aesthetic difference they are functionally completely identical.
There are a lot more on youtube if you search for "Cybergun" or "Palco" instead of KWC.
KWC is the manufacturer of all of these pistols however when they appear with full trademarks it is because they are marketed through Cybergun/Palco - apart from this aesthetic difference they are functionally completely identical.
-
- Posts: 14
- Joined: Fri Aug 31, 2012 10:05 pm
Re: Anyone ever tried a S&W M&P 40 co2 Blowback bb pistol (K
(Seems that) the pistol shoots kind low in the video, I actually have seen this video before, since its got an orange tip, I watched just part of it. Wondering if the recoil of the 4.5mm version is identical to the airsoft version?PZAM wrote:Here's one: https://www.youtube.com/watch?v=sWEFz_xZRds
There are a lot more on youtube if you search for "Cybergun" or "Palco" instead of KWC.
KWC is the manufacturer of all of these pistols however when they appear with full trademarks it is because they are marketed through Cybergun/Palco - apart from this aesthetic difference they are functionally completely identical.
Thank you for the reply and the link.
Re: Anyone ever tried a S&W M&P 40 co2 Blowback bb pistol (K
The blowback is a function of the nozzle which to my knowledge is identical on both the airsoft and airgun versions, so what you see in videos should be representative.
As to shooting low, you can't really compare because the airsoft has a "hop-up" adjustment that induces backspin to lift the BB, making it variable, and this not found on the BB version.
As to shooting low, you can't really compare because the airsoft has a "hop-up" adjustment that induces backspin to lift the BB, making it variable, and this not found on the BB version.
-
- Posts: 14
- Joined: Fri Aug 31, 2012 10:05 pm
Re: Anyone ever tried a S&W M&P 40 co2 Blowback bb pistol (K
Please excuse me for the late response.PZAM wrote:The blowback is a function of the nozzle which to my knowledge is identical on both the airsoft and airgun versions, so what you see in videos should be representative.
As to shooting low, you can't really compare because the airsoft has a "hop-up" adjustment that induces backspin to lift the BB, making it variable, and this not found on the BB version.
Does that mean that by adjusting the hop-up in this 6mm airsoft, the recoil can be stronger which makes the pistol more realistic?
Thanks.