Artemis CR600 CO2 .22 sight issue

Post airgun or equipment related review here. Rifles, pistols, scopes, pumps, aftermarket parts.
Post Reply
Message
Author
80Indy
Posts: 34
Joined: Fri Feb 11, 2022 1:17 pm

Artemis CR600 CO2 .22 sight issue

#1 Post by 80Indy »

I bought my first CO2 rifle. I have springers and multi pumps.
I kind of like it. It'd a bit smaller and lighter than I thought it would be.
It does around 535 fps.
The only issue I have is with the rear sight, very little adjustment left of right.
The sight has maybe 5 notches on each side of center but you can barely move it past one.
Has anyone noticed this?
Knappr
Posts: 1317
Joined: Fri Jul 16, 2010 5:09 pm
Location: Southern Ontario, Canada

Re: Artemis CR600 CO2 .22 sight issue

#2 Post by Knappr »

Just wondering if you have a second barrel band installed? If so loosen it and slight roll it in the direction that starts making a difference. I’ve had the same issue

Also adjusting the sight requires you to loosen the left or right side of the windage adjuster before tighten in the direct you want to go. Ex need to move sight to the right, loosen left side first then tight the right side, then make sure both are tight after the adjustment is complete
Steoger XP4 .177
Hatsan AT44MW-10 .177
Daisy 953S .177
Artemis CR600W .177
Diana Stormrider .177
Seneca Dragonfly MK2 .177
Stoeger XM1 .177
Gamo PR-25 .177
User avatar
wesb2007
Posts: 3978
Joined: Sat Nov 05, 2016 11:52 am
Location: Caronport, Saskatchewan
Contact:

Re: Artemis CR600 CO2 .22 sight issue

#3 Post by wesb2007 »

Yep loosening the side you want it to move towards is key. Otherwise you won't have any adjustment available to speak of, as mentioned above.

Sent from my SM-A536W using Tapatalk
Website: https://airgunarcheryfun.ca/
Post Reply