Canadian Airgun Forum https://www.airgunforum.ca/forums/ |
|
HPA fittings in Canada https://www.airgunforum.ca/forums/topic80299.html |
Page 1 of 1 |
Author: | apitagan [ Sat Aug 11, 2018 6:42 pm ] |
Post subject: | HPA fittings in Canada |
Where do you thinks is the best store to get HPA fittings in Canada or in Edmonton in particular? Setting up a PMV on my Yong Heng with Tuxing Gold filter. Thanks. A. |
Author: | leadslinger [ Sat Aug 11, 2018 6:44 pm ] |
Post subject: | Re: HPA fittings in Canada |
Princess Auto hydraulic section. They have a bunch of 1/8 NPT. And I assume since in the hydraulic section, and not the air tools. That they are rated for high PSI. |
Author: | apitagan [ Sat Aug 11, 2018 6:54 pm ] |
Post subject: | Re: HPA fittings in Canada |
leadslinger wrote: Princess Auto hydraulic section. They have a bunch of 1/8 NPT. And I assume since in the hydraulic section, and not the air tools. That they are rated for high PSI. Thanks leadslinger! Will try to look for metric to 1/8 fNPT reducer to get things started. A. |
Author: | leadslinger [ Sat Aug 11, 2018 7:04 pm ] |
Post subject: | Re: HPA fittings in Canada |
apitagan wrote: leadslinger wrote: Princess Auto hydraulic section. They have a bunch of 1/8 NPT. And I assume since in the hydraulic section, and not the air tools. That they are rated for high PSI. Thanks leadslinger! Will try to look for metric to 1/8 fNPT reducer to get things started. A. Like a M10x1 to 1/8 NPT? Yea they wouldn't have those. All I found online for one was a Tee with a 1/8 NPT in the center with a male and female M10. |
Author: | apitagan [ Sat Aug 11, 2018 7:16 pm ] |
Post subject: | Re: HPA fittings in Canada |
leadslinger wrote: apitagan wrote: leadslinger wrote: Princess Auto hydraulic section. They have a bunch of 1/8 NPT. And I assume since in the hydraulic section, and not the air tools. That they are rated for high PSI. Thanks leadslinger! Will try to look for metric to 1/8 fNPT reducer to get things started. A. Like a M10x1 to 1/8 NPT? Yea they wouldn't have those. All I found online for one was a Tee with a 1/8 NPT in the center with a male and female M10. Oh I have a problem then haha. |
Author: | Ronan_357 [ Sat Aug 11, 2018 7:55 pm ] |
Post subject: | Re: HPA fittings in Canada |
You could try Gregg Distributors, they carry metric, npt and British standard thread fittings. |
Author: | FRANK [ Sat Aug 11, 2018 8:53 pm ] |
Post subject: | Re: HPA fittings in Canada |
Here hope this is what your looking for. http://scopesandammo.com/storefront/ind ... ts-c-38_43 |
Author: | Doc Sharptail [ Sat Aug 11, 2018 11:49 pm ] |
Post subject: | Re: HPA fittings in Canada |
FRANK wrote: X-2. Wish they'd start carrying a tank block again. -D.S. |
Author: | FRANK [ Mon Aug 13, 2018 5:34 pm ] |
Post subject: | Re: HPA fittings in Canada |
Doc a Tank block for what? a QB79? |
Author: | Doc Sharptail [ Tue Aug 14, 2018 9:37 am ] |
Post subject: | Re: HPA fittings in Canada |
FRANK wrote: Doc a Tank block for what? a QB79? ...or a 20-78 or even 22-XX. Forward facing to drop the bottle below the bbl. Been a long time since I seen one in person. -D.S. |
Author: | apitagan [ Tue Aug 14, 2018 10:07 am ] |
Post subject: | Re: HPA fittings in Canada |
Thank you for all your comments! Got most of my fittings from Princess Auto and Ali Express for the metric size adapters. PMV was from NuvAir. Will post pics of my YongHeng pump set up once done. Happy shooting! A |
Page 1 of 1 | All times are UTC - 5 hours |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |